|
This page displays all 「FI」 in main group G01N3/00. |
HB:Handbook | ||||
|
CC:Concordance | |||||
|
|
Investigating strength properties of solid materials by application of mechanical stress | HB | CC | 2G061 | |
|
|
Investigating elastic materials | HB | CC | 2G061 | |
|
|
.Flat springs | HB | CC | 2G061 | |
|
|
.Coil springs | HB | CC | 2G061 | |
|
|
Investigating soil and rocks | HB | CC | 2G061 | |
|
|
.Three-dimensional compression tests | HB | CC | 2G061 | |
|
|
Investigating the thread materials | HB | CC | 2G061 | |
|
|
.Hair | HB | CC | 2G061 | |
|
|
.Optical fibres e.g. brass optical fibre | HB | CC | 2G061 | |
|
|
Investigating visco-elastic materials | HB | CC | 2G061 | |
|
|
Investigating granular materials e.g. table strength | HB | CC | 2G061 | |
|
|
Investigating concrete | HB | CC | 2G061 | |
|
|
Investigating filmy materials e.g. plated film strength | HB | CC | 2G061 | |
|
|
Investigating bonding e.g. weld strength | HB | CC | 2G061 | |
|
|
Creep strength (increase in the strain under the constant temperature or stress) | HB | CC | 2G061 | |
|
|
Toughness tests against fractures e.g. K1c or COD tests | HB | CC | 2G061 | |
|
|
.Toughens tests against elastic or plastic fracturess (J1c test) | HB | CC | 2G061 | |
|
|
.Toughness test against dynamic fracture e.g. dynamic J1c test | HB | CC | 2G061 | |
|
|
Others | HB | CC | 2G061 | |
|
|
.Details | HB | CC | 2G061 | |
|
|
Cross heads | HB | CC | 2G061 | |
|
|
.Lifting device | HB | CC | 2G061 | |
|
|
..Position detection or safety devices | HB | CC | 2G061 | |
|
|
.Fixing devices | HB | CC | 2G061 | |
|
|
.Centering devices | HB | CC | 2G061 | |
|
|
Eliminating backlash | HB | CC | 2G061 | |
|
|
Others | HB | CC | 2G061 | |
|
|
..Chucks | HB | CC | 2G061 | |
|
|
Profiles or structures | HB | CC | 2G061 | |
|
|
.Simplified structures or easier operation | HB | CC | 2G061 | |
|
|
.Smaller or lighter weight | HB | CC | 2G061 | |
|
|
.Equally distributing the supporting force or automatic clamping | HB | CC | 2G061 | |
|
|
Characterised by materials | HB | CC | 2G061 | |
|
|
Positioning | HB | CC | 2G061 | |
|
|
.Axial alignment | HB | CC | 2G061 | |
|
|
.Transferring test specimens | HB | CC | 2G061 | |
|
|
..Transferring with the guides | HB | CC | 2G061 | |
|
|
.Fitting holes | HB | CC | 2G061 | |
|
|
Withdrawing the test specimens | HB | CC | 2G061 | |
|
|
Jigs | HB | CC | 2G061 | |
|
|
Others | HB | CC | 2G061 | |
|
|
..Special adaptations of indicating or recording means | HB | CC | 2G061 | |
|
|
.by applying steady tensile or compressive forces (G01N 3/28 takes precedence) | HB | CC | 2G061 | |
|
|
..generated by pneumatic or hydraulic pressure (G01N 3/18 takes precedence) | HB | CC | 2G061 | |
|
|
...Pressure-testing | HB | CC | 2G061 | |
|
|
..generated by dead weight, e.g. pendulum; generated by spring tension (G01N 3/18 takes precedence) | HB | CC | 2G061 | |
|
|
..applied through gearing (G01N 3/18 takes precedence) | HB | CC | 2G061 | |
|
|
..Performing tests at high or low temperatures | HB | CC | 2G061 | |
|
|
.by applying steady bending forces (G01N 3/26, G01N 3/28 take precedence) | HB | CC | 2G061 | |
|
|
.by applying steady torsional forces (G01N 3/26, G01N 3/28 take precedence) | HB | CC | 2G061 | |
|
|
.by applying steady shearing forces (G01N 3/26, G01N 3/28 take precedence) | HB | CC | 2G061 | |
|
|
.Investigating twisting or coiling properties | HB | CC | 2G061 | |
|
|
.Investigating ductility, e.g. suitability of sheet metal for deep-drawing or spinning | HB | CC | 2G061 | |
|
|
.by applying a single impulsive force (investigating hardness by performing impressions under impulsive load G01N 3/48) | HB | CC | 2G061 | |
|
|
Fatigue tests with repeated shocks | HB | CC | 2G061 | |
|
|
Combined shocks (shocks and tensile strength) | HB | CC | 2G061 | |
|
|
Characterised by materials of the test specimens | HB | CC | 2G061 | |
|
|
Data processing for detecting the shocks | HB | CC | 2G061 | |
|
|
.Measuring and indicating shock energy | HB | CC | 2G061 | |
|
|
Shock tests at high or low temperatures | HB | CC | 2G061 | |
|
|
Others | HB | CC | 2G061 | |
|
|
..generated only by free-falling weight [7] | HB | CC | 2G061 | |
|
|
Gravity fall of test body(New, Apr. 2000) | HB | CC | 2G061 | |
|
|
.Fall according to guide(New, Apr. 2000) | HB | CC | 2G061 | |
|
|
.Fall in a body with falling reservoir(New, Apr. 2000) | HB | CC | 2G061 | |
|
|
Collision of falling object against vertical falling specimen(New, Apr. 2000) | HB | CC | 2G061 | |
|
|
.Fall according to guide(New, Apr. 2000) | HB | CC | 2G061 | |
|
|
Others(New, Apr. 2000) | HB | CC | 2G061 | |
|
|
..generated by a compressed or tensile-stressed spring; generated by pneumatic or hydraulic means [7] | HB | CC | 2G061 | |
|
|
..generated by a rotating fly-wheel [7] | HB | CC | 2G061 | |
|
|
Single percussion of rotation moment of hammer(New, Apr. 2000) | HB | CC | 2G061 | |
|
|
.Hammer(New, Apr. 2000) | HB | CC | 2G061 | |
|
|
..Hammer stop and safety device(New, Apr. 2000) | HB | CC | 2G061 | |
|
|
.Specimen, and the setting and removing of specimen(New, Apr. 2000) | HB | CC | 2G061 | |
|
|
Others(New, Apr. 2000) | HB | CC | 2G061 | |
|
|
..generated by explosives [7] | HB | CC | 2G061 | |
|
|
..generated by electromagnetic means [7] | HB | CC | 2G061 | |
|
|
.by applying repeated or pulsating forces | HB | CC | 2G061 | |
|
|
Thermal fatigue tests | HB | CC | 2G061 | |
|
|
Fatigue tests for visco-elastic materials | HB | CC | 2G061 | |
|
|
Detecting cracks and AE | HB | CC | 2G061 | |
|
|
Forecasting the life and detection thereof | HB | CC | 2G061 | |
|
|
Fatigue due to corrosion | HB | CC | 2G061 | |
|
|
Characterised by detecting devices | HB | CC | 2G061 | |
|
|
.Data processing of the detected signals | HB | CC | 2G061 | |
|
|
Characterised by profiles or structures of the test specimens | HB | CC | 2G061 | |
|
|
Handling test specimens (setting or withdrawing) | HB | CC | 2G061 | |
|
|
Characterised by materials of the test specimens | HB | CC | 2G061 | |
|
|
.Rubber or plastic materials | HB | CC | 2G061 | |
|
|
.Inorganic materials | HB | CC | 2G061 | |
|
|
Accessory devices or jigs | HB | CC | 2G061 | |
|
|
Others | HB | CC | 2G061 | |
|
|
..generated by mechanical means, e.g. hammer blows | HB | CC | 2G061 | |
|
|
Tensile or compression fatigue tests | HB | CC | 2G061 | |
|
|
Bending fatigue tests | HB | CC | 2G061 | |
|
|
Torsion tests | HB | CC | 2G061 | |
|
|
Shearing fatigue tests | HB | CC | 2G061 | |
|
|
Shock fatigue tests | HB | CC | 2G061 | |
|
|
.Shocks due to weight or water drop | HB | CC | 2G061 | |
|
|
Structures or profiles of the test pieces | HB | CC | 2G061 | |
|
|
Handling of the test pieces | HB | CC | 2G061 | |
|
|
Characterised by materials of the test pieces | HB | CC | 2G061 | |
|
|
.Rubber or plastic materials | HB | CC | 2G061 | |
|
|
.Inorganic materials | HB | CC | 2G061 | |
|
|
Characterised by detecting devices | HB | CC | 2G061 | |
|
|
.Data processing of detected signals | HB | CC | 2G061 | |
|
|
Accessory devices or jigs | HB | CC | 2G061 | |
|
|
Others | HB | CC | 2G061 | |
|
|
..generated by pneumatic or hydraulic means | HB | CC | 2G061 | |
|
|
..generated by electromagnetic means | HB | CC | 2G061 | |
|
|
.Investigating hardness or rebound hardness | HB | CC | 2G061 | |
|
|
Investigating impressing hardness | HB | CC | 2G061 | |
|
|
.Fitting tests for the soil or concrete | HB | CC | 2G061 | |
|
|
.Penetrating tests for the visco-elastic materials | HB | CC | 2G061 | |
|
|
.Penetrating tests for the metallic materials | HB | CC | 2G061 | |
|
|
Investigating with vibration or sound wave | HB | CC | 2G061 | |
|
|
Investigating grindstone hardness | HB | CC | 2G061 | |
|
|
Others | HB | CC | 2G061 | |
|
|
..by performing impressions under a steady load by indentors, e.g. sphere, pyramid (G01N 3/54 takes precedence) | HB | CC | 2G061 | |
|
|
Related to the load control | HB | CC | 2G061 | |
|
|
Related to the reading of impression mark | HB | CC | 2G061 | |
|
|
.Characterised by detection of displacement | HB | CC | 2G061 | |
|
|
.Characterised data processing of the images | HB | CC | 2G061 | |
|
|
Related to the positional relationship between the measurement device and test piece | HB | CC | 2G061 | |
|
|
Profiles of the indentors | HB | CC | 2G061 | |
|
|
Others | HB | CC | 2G061 | |
|
|
...the indentors being put under a minor load and a subsequent major load, i.e. Rockwell system | HB | CC | 2G061 | |
|
|
...the indentors performing a scratching movement | HB | CC | 2G061 | |
|
|
..by performing impressions under impulsive load by indentors, e.g. falling ball (G01N 3/54 takes precedence) | HB | CC | 2G061 | |
|
|
..by measuring rolling friction, e.g. by rocking pendulum (G01N 3/54 takes precedence) | HB | CC | 2G061 | |
|
|
..by measuring extent of rebound of a striking body (G01N 3/54 takes precedence) | HB | CC | 2G061 | |
|
|
..Performing tests at high or low temperatures | HB | CC | 2G061 | |
|
|
.Investigating resistance to wear or abrasion | HB | CC | 2G061 | |
|
|
Of textiles or fabrics e.g. carpets | HB | CC | 2G061 | |
|
|
Of threads | HB | CC | 2G061 | |
|
|
Of magnetic disks | HB | CC | 2G061 | |
|
|
Of automotive component parts | HB | CC | 2G061 | |
|
|
.Of tires | HB | CC | 2G061 | |
|
|
Of machine parts | HB | CC | 2G061 | |
|
|
.Of rings or pistons | HB | CC | 2G061 | |
|
|
Of inorganic materials | HB | CC | 2G061 | |
|
|
Of jewelry | HB | CC | 2G061 | |
|
|
Of metallic materials | HB | CC | 2G061 | |
|
|
Of plastics or rubber materials | HB | CC | 2G061 | |
|
|
Sand erosion method | HB | CC | 2G061 | |
|
|
Tests at high or low temperatures | HB | CC | 2G061 | |
|
|
Characterised by devices for detecting the displacement | HB | CC | 2G061 | |
|
|
.Characterised by data processing of the images | HB | CC | 2G061 | |
|
|
Others | HB | CC | 2G061 | |
|
|
.Investigating machinability by cutting tools; Investigating the cutting ability of tools | HB | CC | 2G061 | |
|
|
Investigating machinability | HB | CC | 2G061 | |
|
|
Revolving cutting tool | HB | CC | 2G061 | |
|
|
.Detecting cutting force | HB | CC | 2G061 | |
|
|
..Characterised by data processing | HB | CC | 2G061 | |
|
|
.Detecting tool position | HB | CC | 2G061 | |
|
|
..Detecting tool wear (life) | HB | CC | 2G061 | |
|
|
..Detecting damaged tools (fault) | HB | CC | 2G061 | |
|
|
Revolving abrasive tools (grinder) | HB | CC | 2G061 | |
|
|
Non-revolving cutting tools | HB | CC | 2G061 | |
|
|
Others | HB | CC | 2G061 | |
|
|
.Investigating resistance of materials, e.g. refractory materials, to rapid heat changes | HB | CC | 2G061 | |
|
|
Thermal shocks (without the stress load) | HB | CC | 2G061 | |
|
|
.Repeated heating or cooling | HB | CC | 2G061 | |
|
|
..Characterised by sensors | HB | CC | 2G061 | |
|
|
..Control or data processing | HB | CC | 2G061 | |
|
|
Thermal shocks under the stress load | HB | CC | 2G061 | |
|
|
.Thermal fatigue (strength tests) | HB | CC | 2G061 | |
|
|
..Characterised by sensors | HB | CC | 2G061 | |
|
|
..Control or data processing | HB | CC | 2G061 | |
|
|
Test pieces | HB | CC | 2G061 | |
|
|
.Characterised by materials | HB | CC | 2G061 | |
|
|
.Characterised by structures | HB | CC | 2G061 | |
|
|
.Characterised by settings | HB | CC | 2G061 | |
|
|
Accessory devices for heating or cooling | HB | CC | 2G061 | |
|
|
Others | HB | CC | 2G061 | |
|
|
.Manufacturing, calibrating, or repairing devices used in investigations covered by the preceding subgroups | HB | CC | 2G061 | |