|
This page displays all 「FI」 in main group H02P23/00. |
HB:Handbook | ||||
|
CC:Concordance | |||||
|
|
Arrangements or methods for the control of AC motors characterised by a control method other than vector control [8,2016.01] | HB | CC | 5H505 | |
|
|
.specially adapted for optimising the efficiency at low load [2006.01] | HB | CC | 5H505 | |
|
|
.specially adapted for very low speeds [2006.01] | HB | CC | 5H505 | |
|
|
.specially adapted for damping motor oscillations, e.g. for reducing hunting [2006.01] | HB | CC | 5H505 | |
|
|
.Controlling the motor in four quadrants [8,2016.01] | HB | CC | 5H505 | |
|
|
..Polyphase or monophase asynchronous induction motors [2016.01] | HB | CC | 5H505 | |
|
|
.Controlling based on slip frequency, e.g. adding slip frequency and speed proportional frequency [2006.01] | HB | CC | 5H505 | |
|
|
.Controlling by adding a dc current [2006.01] | HB | CC | 5H505 | |
|
|
.Observer control, e.g. using Luenberger observers or Kalman filters [2006.01] | HB | CC | 5H505 | |
|
|
.Estimation or adaptation of motor parameters, e.g. rotor time constant, flux, speed, current or voltage [2006.01] | HB | CC | 5H505 | |
|
|
.Controlling the angular speed of one shaft(H02P23/18 takes precedence) [2016.01] | HB | CC | 5H505 | |
|
|
.Controlling the angular speed together with angular position or phase [2016.01] | HB | CC | 5H505 | |
|
|
.Controlling the acceleration or deceleration [2016.01] | HB | CC | 5H505 | |
|
|
.Controlling the speed digitally using a reference oscillator, a speed proportional pulse rate feedback and a digital comparator [2016.01] | HB | CC | 5H505 | |
|
|
.Controlling the direction, e.g. clockwise or counterclockwise [2016.01] | HB | CC | 5H505 | |
|
|
.Power factor control [PFC] [2016.01] | HB | CC | 5H505 | |
|
|
.Controlling the motor by varying the switching frequency of switches connected to a DC supply and the motor phases [2016.01] | HB | CC | 5H505 | |
|
|
.Direct torque control [DTC] or field acceleration method [FAM] [2016.01] | HB | CC | 5H505 | |