FI (list display)

  • G06F3/00
  • Input arrangements for transferring data to be processed into a form capable of being handled by the computer; Output arrangements for transferring data from processing unit to output unit, e.g. interface arrangements [2006.01] HB CC 5B041
  • G06F3/00@A
  • Related to connection, addition, cutoff, selection or switching the devices (W or Y takes precedence) HB CC 5B041
  • G06F3/00@B
  • .Active inserting or removal (inserting or withdrawing live wires) (Connections or disconnection without shutting off the power supply) HB CC 5B041
  • G06F3/00@C
  • .Non-contact connecting circuits (DC insulated connection) HB CC 5B041
  • G06F3/00@D
  • ..Optical coupling HB CC 5B041
  • G06F3/00@E
  • Optical transfer (including transfers with optical fibers) (including optical buses) HB CC 5B041
  • G06F3/00@F
  • Circuits for connecting or shutting off the bus lines (including circuit connection of abnormal buses) e.g. bus width conversion HB CC 5B041
  • G06F3/00@G
  • Bus driving circuits in general HB CC 5B041
  • G06F3/00@H
  • .Transmitters or receivers (including tristate buffers or latches) HB CC 5B041
  • G06F3/00@J
  • Pre-charging, discharging, pulling up or pulling down (mainly for increasing the speed) HB CC 5B041
  • G06F3/00@K
  • Aligning or preventing reflection HB CC 5B041
  • G06F3/00@L
  • Level conversion, level shift, positive or negative directions HB CC 5B041
  • G06F3/00@M
  • Parallel bus transfer (N takes precedence) HB CC 5B041
  • G06F3/00@N
  • Intermediary relay amplifier circuits HB CC 5B041
  • G06F3/00@P
  • For reducing number of pins (including those by P/S conversion) HB CC 5B041
  • G06F3/00@Q
  • Related to power supply circuits (Y takes precedence) HB CC 5B041
  • G06F3/00@R
  • .Energy saving measures HB CC 5B041
  • G06F3/00@S
  • Related to structures HB CC 5B041
  • G06F3/00@T
  • .Bus structures (including connection forms) HB CC 5B041
  • G06F3/00@V
  • .Mounting techniques for connectors, cables, plugs or jacks HB CC 5B041
  • G06F3/00@W
  • Preventing malfunctioning or monitoring (monitor) (software G 06 F 13/00-301) HB CC 5B041
  • G06F3/00@X
  • .Preventing generation of noises (J takes precedence) HB CC 5B041
  • G06F3/00@Y
  • .Protecting devices (B or C takes precedence) (including prevention of rush current) HB CC 5B041
  • G06F3/00@Z
  • Others HB CC 5B041
  • G06F3/01
  • .Input arrangements or combined input and output arrangements for interaction between user and computer (G06F 3/16 takes precedence) [2006.01] HB CC 5E555
  • G06F3/01,510
  • ..device for interaction with human body HB CC 5E555
  • G06F3/01,514
  • ...input and output device wore on hand, e.g. data glove HB CC 5E555
  • G06F3/01,515
  • ...input device based on activity of nervous system, e.g. detection of brain wave or electromyogram HB CC 5E555
  • G06F3/01,560
  • ..tactical and kinesthetic sense feedback HB CC 5E555
  • G06F3/01,570
  • ..gesture input HB CC 5E555
  • G06F3/01,590
  • ..special input device or input is combined with output to compose special device HB CC 5E555
  • G06F3/02
  • ..Input arrangements using manually operated switches, e.g. using keyboards or dials [2006.01] HB CC 5B020
  • G06F3/02@A
  • characterised by switch elements used HB CC 5B020
  • G06F3/02@B
  • .By using magnets HB CC 5B020
  • G06F3/02@C
  • ..by using lead switches HB CC 5B020
  • G06F3/02@D
  • .By using lights HB CC 5B020
  • G06F3/02@E
  • .Corresponding to pressures HB CC 5B020
  • G06F3/02@F
  • .By using capacities HB CC 5B020
  • G06F3/02@Z
  • Others HB CC 5B020
  • G06F3/02,400
  • ...Constructional details or processes of manufacture of the input device HB CC 5B020
  • G06F3/02,410
  • ....Lever arrangements for operating keyboard cursor control keys in a joystick-like manner HB CC 5B020
  • G06F3/02,420
  • ....Arrangements for adjusting the tilt angle of a keyboard, e.g. pivoting legs HB CC 5B020
  • G06F3/02,430
  • ....Arrangements integrating additional peripherals in a keyboard, e.g. card or barcode reader, optical scanner HB CC 5B020
  • G06F3/02,440
  • .....Arrangements providing an integrated pointing device in a keyboard, e.g. trackball, mini-joystick HB CC 5B020
  • G06F3/02,450
  • ....Arrangements for ergonomically adjusting the disposition of keys of a keyboard HB CC 5B020
  • G06F3/02,460
  • ....Special purpose keyboards HB CC 5B020
  • G06F3/02,470
  • ....Arrangements for reducing keyboard size for transport or storage HB CC 5B020
  • G06F3/02,480
  • ....Key guide holders HB CC 5B020
  • G06F3/02,490
  • ....Key covers HB CC 5B020
  • G06F3/02,500
  • ...Cooperation and interconnection of the input arrangement with other functional units of a computer HB CC 5B020
  • G06F3/02,510
  • ....Controlling inputs HB CC 5B020
  • G06F3/02,520
  • ....connecting a keyboard with other input devices HB CC 5B020
  • G06F3/02,530
  • ....Error prevention countermeasures or testing therefor HB CC 5B020
  • G06F3/023
  • ...Arrangements for converting discrete items of information into a coded form, e.g. arrangements for interpreting keyboard generated codes as alphanumeric codes, operand codes or instruction codes [2006.01] HB CC 5B020
  • G06F3/023,400
  • ....Codeless keyboards HB CC 5B020
  • G06F3/023,410
  • ....Manual direct entries, e.g. key to main memory HB CC 5B020
  • G06F3/023,420
  • ....Character input methods HB CC 5B020
  • G06F3/023,430
  • .....Generating plurality of characters HB CC 5B020
  • G06F3/023,440
  • .....using switches operable in different directions HB CC 5B020
  • G06F3/023,450
  • .....using chord techniques, i.e. simultaneous depression (G06F3023, 440 take precedence) HB CC 5B020
  • G06F3/023,460
  • .....using selection techniques to select from displayed items HB CC 5B020
  • G06F3/023,470
  • .....using prediction or retrieval techniques HB CC 5B020
  • G06F3/023,480
  • ....Programmable keyboards HB CC 5B020
  • G06F3/027
  • ....for insertion of the decimal point [2006.01] HB CC 5B020
  • G06F3/03
  • ..Arrangements for converting the position or the displacement of a member into a coded form [2006.01] HB CC 5B068
  • G06F3/03,400
  • ...structures and control of the devices used with pen-shaped pointing devices or digitizers, which detect the displacements actively, and detected the position, and characterised by the general aspects which are common to each detecting method e.g. general structure of the pen (G06F 3/033 to G06F 3/047 take precedence for the structures and control for detecting the positions by each detecting method; also classified to G06F 3/033 to G06F 3/047) HB CC 5B068
  • G06F3/03,400@A
  • of detecting pen pressure HB CC 5B068
  • G06F3/03,400@B
  • of a plurality of modes, and using a plurality of devices HB CC 5B068
  • G06F3/03,400@C
  • .of starting switches HB CC 5B068
  • G06F3/03,400@D
  • .of change-over switches HB CC 5B068
  • G06F3/03,400@E
  • for housing HB CC 5B068
  • G06F3/03,400@F
  • of the structures in general HB CC 5B068
  • G06F3/03,400@Z
  • others HB CC 5B068
  • G06F3/033
  • ...Pointing devices displaced or positioned by the user; its accessories (digitizer characterised by conversion means G06F3/041) [3,8, 2013. 01] HB CC 5B087
  • G06F3/033@A
  • Pointing device not contained in G06F3/0338-G06F3/037 HB CC 5B087
  • G06F3/033@Z
  • Others HB CC 5B087
  • G06F3/0338
  • ....with detection of limited linear or angular displacement of an operating part of the device from a neutral position, e.g. isotonic or isometric joysticks [2013.01] HB CC 5B087
  • G06F3/0338,411
  • .....basic element of joy stick, pointing stick (including those using strain sensor) [easy to hold, easy to move or design quality of stick and housing, slope detection mechanism](button arranged on joy stick G06F3/0338 412) HB CC 5B087
  • G06F3/0338,412
  • .....with joysticks; pointing sticks (including devices using strain sensors): auxiliary elements for multi-dimensional input HB CC 5B087
  • G06F3/0338,413
  • .....with directional keypads, multi-directional keypads HB CC 5B087
  • G06F3/0346
  • ....with detection of the device orientation or free movement in a 3D space, e.g. 3D mice, 6-DOF [six degrees of freedom] pointers using gyroscopes, accelerometers or tilt-sensors [2013.01] HB CC 5B087
  • G06F3/0346,421
  • .....with detection by sensors in space or fixed by supporting members HB CC 5B087
  • G06F3/0346,422
  • ......with detection by cameras in space or fixed by supporting members HB CC 5B087
  • G06F3/0346,423
  • .......with detection of lines of sights by photographing eyes by cameras in space or fixed by supporting members HB CC 5B087
  • G06F3/0346,424
  • .....with detection by sensors, e.g. magnetic sensors, built in operating members HB CC 5B087
  • G06F3/0346,425
  • ......with detection by gyroscopes or acceleration sensors built in operating members HB CC 5B087
  • G06F3/0346,426
  • ......with detection by cameras built in operating members HB CC 5B087
  • G06F3/0354
  • ....with detection of 2D relative movements between the device, or an operating part thereof, and a plane or surface, e.g. 2D mice, trackballs, pens or pucks [2013.01] HB CC 5B087
  • G06F3/0354,431
  • .....with trackballs HB CC 5B087
  • G06F3/0354,432
  • .....slide back, i.e. pointing device having operating member changing planary positions within prescribed range on supporting member (mouse hasving its position fixed within prescribed range G06F3/0354 440) HB CC 5B087
  • G06F3/0354,440
  • .....pointing devices displaced or positioned by the user on a predetermined plane, and the position or displacement of the supporting member is detected e.g. mice, pen shaped pointing devices (accessories : G06F/039) HB CC 5B087
  • G06F3/0354,441
  • ......with mice: basic elements [easiness to hold and move the casings, or related to design, mouse buttons, ball rotation detecting mechanisms] (pen shaped device: G06F 3/0354,445) HB CC 5B087
  • G06F3/0354,442
  • ......with mice: auxiliary elements for multi dimensional input, e.g. wheels, digitizers, mouse rotation detecting mechanisms using two balls HB CC 5B087
  • G06F3/0354,443
  • ......with mice: other auxiliary elements , e.g. electronic calculators, generators, card readers, means for cable housing, means for vibration feedback HB CC 5B087
  • G06F3/0354,444
  • ......with mice: detection by other than ball rotation, e.g. light, acceleration (pen shaped device: G06F 3/0354, 445) HB CC 5B087
  • G06F3/0354,445
  • ......with pen shaped pointing devices, i.e. pen shaped pointing devices detecting hand-writing input independently (digitizer: G06F 3/041 to G06F 3/047; optical pattern on a sheet: G06F 3/042, 421) HB CC 5B087
  • G06F3/0354,450
  • .....with pad type pointing devices, i.e. pointing devices detecting the displacement of fingers to which input area having the same area in size with or smaller area in size of a range of finger motion is touched or is proximate, e.g. touchpads, optical pseudo-trackballs (also classified to G06F3/033, 411 for joysticks; G06F 3/041 to G06F 3/047 for detecting methods of digitizers or details) HB CC 5B087
  • G06F3/0354,451
  • ......by detection using optical means HB CC 5B087
  • G06F3/0354,452
  • ......by detection of two-dimensional displacement of fingers using fingerprint sensors HB CC 5B087
  • G06F3/0354,453
  • ......with touchpads (also classified to G06F 3/041 - G06F 3/047 for devices characterised by means for conversion) HB CC 5B087
  • G06F3/0362
  • ....with detection of 1D translations or rotations of an operating part of the device, e.g. scroll wheels, sliders, knobs, rollers or belts [2013.01] HB CC 5B087
  • G06F3/0362,461
  • .....dials, scroll wheels, rollers HB CC 5B087
  • G06F3/0362,462
  • ......by detection using one-dimensional touch sensor HB CC 5B087
  • G06F3/0362,463
  • .....sliders, belts HB CC 5B087
  • G06F3/0362,464
  • ......by detection using one-dimensional touch sensor HB CC 5B087
  • G06F3/037
  • ....using the raster scan of a cathode-ray tube (CRT) for detecting the position of the member, e.g. light pens cooperating with CRT monitors [3,8,2013.01] HB CC 5B087
  • G06F3/037@A
  • Light-pens in general HB CC 5B087
  • G06F3/037@Z
  • Others HB CC 5B087
  • G06F3/037,320
  • .....For raster scanning type CRT HB CC 5B087
  • G06F3/037,330
  • ......Determining positions HB CC 5B087
  • G06F3/037,330@A
  • Measures for the light pen field of vision, e.g. based on the restriction of light pen diameter HB CC 5B087
  • G06F3/037,330@B
  • Compensating detected positions HB CC 5B087
  • G06F3/037,330@C
  • Devices with plurality of CRTs HB CC 5B087
  • G06F3/037,330@D
  • Measures for noises or malfunctions; double detection or comparisons HB CC 5B087
  • G06F3/037,330@E
  • Scanning control in general HB CC 5B087
  • G06F3/037,330@Z
  • Others HB CC 5B087
  • G06F3/037,340
  • ......For controlling brightness or marker HB CC 5B087
  • G06F3/037,340@A
  • Changing brightness or colours HB CC 5B087
  • G06F3/037,340@B
  • Measures for afterimages HB CC 5B087
  • G06F3/037,340@C
  • Detecting marker or detected patterns HB CC 5B087
  • G06F3/037,340@Z
  • Others HB CC 5B087
  • G06F3/037,350
  • ......Light pen per se HB CC 5B087
  • G06F3/037,350@A
  • Structures or circuits HB CC 5B087
  • G06F3/037,350@B
  • Detecting pressing force of starting switch HB CC 5B087
  • G06F3/037,350@C
  • Filters HB CC 5B087
  • G06F3/037,350@Z
  • Others HB CC 5B087
  • G06F3/037,360
  • ......Measures for operators HB CC 5B087
  • G06F3/037,360@A
  • Specifying or limiting light pen range HB CC 5B087
  • G06F3/037,360@B
  • Checking inputs e.g. floodlighting HB CC 5B087
  • G06F3/037,360@C
  • Displaying input figures, e.g. keyboard HB CC 5B087
  • G06F3/037,360@Z
  • Others HB CC 5B087
  • G06F3/037,370
  • ......Processing inputs HB CC 5B087
  • G06F3/037,370@A
  • Trimming figures HB CC 5B087
  • G06F3/037,370@B
  • Moving, reducing or enlarging figures HB CC 5B087
  • G06F3/037,370@C
  • Pen motions, cursors, drawing lines HB CC 5B087
  • G06F3/037,370@D
  • Controlling or reading lines of characters HB CC 5B087
  • G06F3/037,370@E
  • Controlling, reading or changing display contents HB CC 5B087
  • G06F3/037,370@F
  • Special patterns e.g. displaying dummy barcodes HB CC 5B087
  • G06F3/037,370@Z
  • Others HB CC 5B087
  • G06F3/038
  • ....Control and interface arrangements therefor, e.g. drivers or device-embedded control circuitry [8,2013.01] HB CC 5B087
  • G06F3/038,310
  • .....controlling input appliances HB CC 5B087
  • G06F3/038,310@A
  • Eye-gaze input or input using movements of eyes or head HB CC 5B087
  • G06F3/038,310@B
  • Keys for moving cursor, e.g. cursor keys on keyboards HB CC 5B087
  • G06F3/038,310@C
  • Mouse using special, e.g. optical or magnetic, means HB CC 5B087
  • G06F3/038,310@Y
  • Special means HB CC 5B087
  • G06F3/038,310@Z
  • Others HB CC 5B087
  • G06F3/038,320
  • ......Pens HB CC 5B087
  • G06F3/038,330
  • ......Joysticks HB CC 5B087
  • G06F3/038,340
  • ......Rolling balls HB CC 5B087
  • G06F3/038,350
  • ......for cursor processing HB CC 5B087
  • G06F3/038,350@D
  • Cursor movement, e.g. speed or control HB CC 5B087
  • G06F3/038,350@R
  • Control according to the position of cursor HB CC 5B087
  • G06F3/038,350@Z
  • Others HB CC 5B087
  • G06F3/039
  • ....Accessories therefor, e.g. mouse pads [8,2013.01] HB CC 5B087
  • G06F3/041
  • ...Digitisers, e.g. for touch screens or touch pads, characterised by the transducing means [2006.01] HB CC 5B068
  • G06F3/041,400
  • ....structural detail of digitizer HB CC 5B068
  • G06F3/041,410
  • .....having parts jointly used by indicator and digitizer HB CC 5B068
  • G06F3/041,412
  • ......having in-cell structure HB CC 5B068
  • G06F3/041,420
  • .....characterized by pattern, shape of sensing electrode HB CC 5B068
  • G06F3/041,422
  • ......by capacitive means HB CC 5B068
  • G06F3/041,430
  • .....extracting electrode or wire, i.e. electrode or wire connected to sinsing electrode HB CC 5B068
  • G06F3/041,440
  • .....structure to correct deformation around peripheral of digitizer, e.g. electrode to improve linearity HB CC 5B068
  • G06F3/041,450
  • .....frame region, i.e. to conceal periphery of detecting element, e.g. decorating part HB CC 5B068
  • G06F3/041,460
  • .....part of surface connected to indicator, e.g. protection layer, protection film, roughening of surface HB CC 5B068
  • G06F3/041,470
  • .....electrical shield in digitizer, e.g. electrical shield of electrostatic capacity type touch panel HB CC 5B068
  • G06F3/041,480
  • .....having structure to actively transmit tactile and kinesthetic senses, e.g. force feedback mechanizm HB CC 5B068
  • G06F3/041,490
  • .....characterized by permeability, reflectance and refractive index, e.g. dummy electrode as measure against see-through frame, setting up of multiple layers having different reflectance HB CC 5B068
  • G06F3/041,495
  • .....composition of member, materials having characteristics HB CC 5B068
  • G06F3/041,500
  • ....control of digitizer and interface device HB CC 5B068
  • G06F3/041,510
  • .....drive ad scan of position detecting means having characteristics HB CC 5B068
  • G06F3/041,512
  • ......by capacitive means HB CC 5B068
  • G06F3/041,520
  • .....correction or revision of errors, e.g. parallax, calibration HB CC 5B068
  • G06F3/041,522
  • ......treatment for removing or decreasing of noise HB CC 5B068
  • G06F3/041,530
  • .....dynamic setting of detecting region, e.g. increase, decrease, move HB CC 5B068
  • G06F3/041,532
  • ......performs coordinate transformation of input of part of region, e.g. coordinate transformation of virtual touchpad HB CC 5B068
  • G06F3/041,534
  • ......nullification or input prohibition of designated region, e.g. establishment of dead zone, making void of holding region HB CC 5B068
  • G06F3/041,540
  • .....changing output of digitizer by other input device HB CC 5B068
  • G06F3/041,550
  • .....control of multiple touch panels, e.g. operation of connecting or straddling over HB CC 5B068
  • G06F3/041,560
  • .....recognizing sevaral types of indicators, e.g. finger and atgylus, several types of stylus HB CC 5B068
  • G06F3/041,570
  • .....related to electric power saving HB CC 5B068
  • G06F3/041,580
  • .....proximity detection, e.g. air, hover HB CC 5B068
  • G06F3/041,590
  • .....multi touch detection, i.e. detects multiple positions HB CC 5B068
  • G06F3/041,595
  • .....characterized by detection of trajectory, gesture HB CC 5B068
  • G06F3/041,600
  • ....using pressure detection means HB CC 5B068
  • G06F3/041,602
  • .....determine position by pressure detection means HB CC 5B068
  • G06F3/041,610
  • ....installing position detection means on its back and side HB CC 5B068
  • G06F3/041,620
  • ....different position detection means being vertically combined, e.g. hybrid touch panel HB CC 5B068
  • G06F3/041,630
  • ....for use in large size display device, e.g. for electronic whiteboard, large size screen or projector HB CC 5B068
  • G06F3/041,640
  • ....flexible digitizer, i.e. dogotizer able to fold or toll up like paper HB CC 5B068
  • G06F3/041,650
  • ....digitizer with whole touching surface formed in curvature HB CC 5B068
  • G06F3/041,660
  • ....characterized by manufacturing method HB CC 5B068
  • G06F3/041,662
  • .....structure, attachment og digitizer peripherals, e.g. sealing for protection against dust , water HB CC 5B068
  • G06F3/042
  • ....by opto-electronic means [2006.01] HB CC 5B068
  • G06F3/042@L
  • with light-guiding panel on which position detection is operated (also classified to G06F 3/042, 410 to 485) HB CC 5B068
  • G06F3/042@P
  • devices per se detected the position by digitizer using opto-electronic means e.g. structures of light emitting pen (also classified to G06F 3/042, 410 to 485) HB CC 5B068
  • G06F3/042@Z
  • Others HB CC 5B068
  • G06F3/042,410
  • .....by detection of the position by light receiving on pen side HB CC 5B068
  • G06F3/042,420
  • ......by light receiving with pen / perpendicular type, i.e. pens receive light which is perpendicular or out of perpendicular to position detection side (light pen based on raster scan of CRT G06F 3/037) HB CC 5B068
  • G06F3/042,421
  • .......by code pattern type, i.e. by arrangement of geometrical optical patterns corresponding to the positional information on a face, e.g. by dot patterns HB CC 5B068
  • G06F3/042,422
  • .......by light emitting device matrix type, i.e. by arrangement of a plurality of light emitting devices on a plane HB CC 5B068
  • G06F3/042,430
  • ......by light receiving with pen / parallel type, i.e. pens receive light which is parallel to position detection side HB CC 5B068
  • G06F3/042,460
  • .....by detection of the position by light receiving on digitizer side HB CC 5B068
  • G06F3/042,470
  • ......by light receiving with digitizer / perpendicular type, i.e. digitizers receive light which is perpendicular or out of perpendicular to position detection side HB CC 5B068
  • G06F3/042,471
  • .......by light receiving device matrix type, i.e. by arrangement of a plurality of light receiving devices on a plane HB CC 5B068
  • G06F3/042,472
  • ........by arrangement of light emitting devices or display devices corresponding to light receiving devices HB CC 5B068
  • G06F3/042,473
  • .......with cameras facing position detection side HB CC 5B068
  • G06F3/042,480
  • ......by digitizer light receiving / parallel type, i.e. digitizers receives light beams which is parallel to position detection side HB CC 5B068
  • G06F3/042,481
  • .......by light emission detecting type, i.e. light beam is detected when digitizers receive light emission or reflection caused by input in parallel to position detection side HB CC 5B068
  • G06F3/042,482
  • ........by detection of angle HB CC 5B068
  • G06F3/042,483
  • .......by light beam protection detecting types, i.e. light beam is detected when digitizers receive light protection caused by input in parallel to position detection side HB CC 5B068
  • G06F3/042,484
  • ........light beams crossing like grid pattern HB CC 5B068
  • G06F3/042,485
  • ........by detection of angle HB CC 5B068
  • G06F3/043
  • ....using propagating acoustic waves [2006.01] HB CC 5B068
  • G06F3/044
  • ....by capacitive means [2006.01] HB CC 5B068
  • G06F3/044@A
  • Detecting potential differences of tablets by pens HB CC 5B068
  • G06F3/044@B
  • Detecting potential differences of pens by tablets HB CC 5B068
  • G06F3/044@Z
  • Others HB CC 5B068
  • G06F3/044,110
  • .....surface type HB CC 5B068
  • G06F3/044,120
  • .....projection type HB CC 5B068
  • G06F3/044,122
  • ......applying thin metallic wire to sensing electrode HB CC 5B068
  • G06F3/044,124
  • ......electrode single layer HB CC 5B068
  • G06F3/044,125
  • .......characterized by bridge part HB CC 5B068
  • G06F3/044,126
  • ......electrode double layer HB CC 5B068
  • G06F3/044,127
  • .......electrode being arranged on both sides of a substrate HB CC 5B068
  • G06F3/044,128
  • .......two substrates each equipped with electrode being pasted together HB CC 5B068
  • G06F3/044,129
  • .......electrode and insulating layer forming lamination layer in order on one substrate HB CC 5B068
  • G06F3/044,130
  • .....detecting capacity cirresponding to position of electrode direction HB CC 5B068
  • G06F3/044,140
  • .....capacity change caused by distance change between electrodes due to pressing force HB CC 5B068
  • G06F3/045
  • ....using resistive elements, e.g. a single continuous surface or two parallel surfaces put in contact [2006.01] HB CC 5B068
  • G06F3/045@A
  • Resistance wires: general HB CC 5B068
  • G06F3/045@B
  • Resistance wires: comb type HB CC 5B068
  • G06F3/045@C
  • Resistance films in general HB CC 5B068
  • G06F3/045@D
  • Resistance films having single film in general which is shared by X and Y axes HB CC 5B068
  • G06F3/045@E
  • Resistance films having single film structure HB CC 5B068
  • G06F3/045@F
  • Resistance films having double film in general, e.g. independent films for X or Y axis HB CC 5B068
  • G06F3/045@G
  • Resistance films having double film structure HB CC 5B068
  • G06F3/045@H
  • Coupling of resistance and capacitance: Detecting of phase difference HB CC 5B068
  • G06F3/045@Z
  • Others HB CC 5B068
  • G06F3/046
  • ....by electromagnetic means [2006.01] HB CC 5B068
  • G06F3/046@A
  • AC driving pens in common HB CC 5B068
  • G06F3/046@B
  • AC driving pens being detecting-voltage type HB CC 5B068
  • G06F3/046@C
  • AC driving pens being detecting-phase type HB CC 5B068
  • G06F3/046@D
  • AC driving pens with special means HB CC 5B068
  • G06F3/046@E
  • Magnet pens being driving or sense-line type HB CC 5B068
  • G06F3/046@F
  • Magnet pens in common or not otherwise provided for HB CC 5B068
  • G06F3/046@G
  • Pen detection being detecting-voltage type HB CC 5B068
  • G06F3/046@H
  • Pen detection being detecting-phase type HB CC 5B068
  • G06F3/046@J
  • Others HB CC 5B068
  • G06F3/046@P
  • Common features HB CC 5B068
  • G06F3/046@Q
  • Combination of plural types HB CC 5B068
  • G06F3/046@R
  • Correction of errors by the height, inclination or ends of the pens HB CC 5B068
  • G06F3/046@Z
  • Others HB CC 5B068
  • G06F3/047
  • ....using sets of wires, e.g. crossed wires [2006.01] HB CC 5B068
  • G06F3/047@A
  • Mechanical means HB CC 5B068
  • G06F3/047@B
  • Elastic bodies or elastic sense lines per se HB CC 5B068
  • G06F3/047@C
  • Pressure-sensitive and conductive sheets arranged between X and Y sense lines HB CC 5B068
  • G06F3/047@Z
  • Others HB CC 5B068
  • G06F3/048
  • ..Interaction techniques based on graphical user interfaces [GUI] [2006.01, 2013.01] HB CC 5E555
  • G06F3/0481
  • ...based on specific properties of the displayed interaction object or a metaphor-based environment, e.g. interaction with desktop elements like windows or icons, or assisted by a cursor's changing behaviour or appearance [2013.01, 2022.01] HB CC 5E555
  • G06F3/04812
  • ....Interaction techniques based on cursor appearance or behaviour, e.g. being affectedby the presence of displayed objects [2022.01] HB CC 5E555
  • G06F3/04815
  • ....Interaction with a metaphor-based environment or interaction object displayed as three-dimensional, e.g. changing the user viewpoint with respect to the environment or object [2022.01] HB CC 5E555
  • G06F3/04817
  • ....using icons (graphical or visual programming using iconic symbols G06F 8/34) [2022.01] HB CC 5E555
  • G06F3/0482
  • ....interaction with lists of selectable items, e.g. menus [2013.01] HB CC 5E555
  • G06F3/0483
  • ....interaction with page-structured environments, e.g. book metaphor [2013.01] HB CC 5E555
  • G06F3/0484
  • ...for the control of specific functions or operations, e.g. selecting or manipulating an object, an image or a displayed text element,setting a parameter value or selecting a range [2013.01, 2022.01] HB CC 5E555
  • G06F3/04842
  • ....Selection of displayed objects or displayed text elements (G06F 3/0482 takes precedence) [2022.01] HB CC 5E555
  • G06F3/04845
  • ....for image manipulation, e.g. dragging, rotation, expansion or change of colour [2022.01] HB CC 5E555
  • G06F3/04847
  • ....Interaction techniques to control parameter settings, e.g. interaction with sliders or dials [2022.01] HB CC 5E555
  • G06F3/0485
  • ....Scrolling or panning [2013.01, 2022.01] HB CC 5E555
  • G06F3/04855
  • .....Interaction with scrollbars [2022.01] HB CC 5E555
  • G06F3/0486
  • ....Drag-and-drop [2013.01] HB CC 5E555
  • G06F3/0487
  • ...using specific features provided by the input device, e.g. functions controlled by the rotation of a mouse with dual sensing arrangements, or of the nature of the input device, e.g. tap gestures based on pressure sensed by a digitiser [2013.01] HB CC 5E555
  • G06F3/0488
  • ....using a touch-screen or digitiser, e.g. input of commands through traced gestures [2013.01, 2022.01] HB CC 5E555
  • G06F3/04883
  • .....for inputting data by handwriting, e.g.gesture or text [2022.01] HB CC 5E555
  • G06F3/04886
  • .....by partitioning the display area of the touch-screen or the surface of the digitising tablet into independently controllable areas, e.g. virtual keyboards or menus [2022.01] HB CC 5E555
  • G06F3/0489
  • ....using dedicated keyboard keys orcombinations thereof [2013.01, 2022.01] HB CC 5E555
  • G06F3/0489,170
  • .....special input or command to improve display ability HB CC 5E555
  • G06F3/04892
  • .....Arrangements for controlling cursor position based on codes indicative of cursor displacements from one discrete location to another, e.g. using cursor control keys associated to different directions or using the tab key (arrangements for controlling cursor position based on coordinate signals G06F 3/038) [2022.01] HB CC 5E555
  • G06F3/04895
  • .....Guidance during keyboard inputoperation, e.g. prompting [2022.01] HB CC 5E555
  • G06F3/05
  • .Digital input using the sampling of an analogue quantity at regular intervals of time [2006.01] HB CC 5B031
  • G06F3/05@A
  • Aiming at high speed processing HB CC 5B031
  • G06F3/05@B
  • .Parallel processing HB CC 5B031
  • G06F3/05@C
  • .Processing via buffers HB CC 5B031
  • G06F3/05@D
  • Obtaining analog outputs by A/D conversion HB CC 5B031
  • G06F3/05@F
  • Can be used as digital input terminals HB CC 5B031
  • G06F3/05@K
  • Related to synchronisation, clock or timing adjustments HB CC 5B031
  • G06F3/05@Y
  • Power supplies HB CC 5B031
  • G06F3/05@Z
  • Others HB CC 5B031
  • G06F3/05,301
  • ..Signal processing before A/D conversion HB CC 5B031
  • G06F3/05,301@A
  • Channel switching by scanner multiplexer HB CC 5B031
  • G06F3/05,301@B
  • .Adaptability control of scanners HB CC 5B031
  • G06F3/05,301@E
  • Data acquisition considering priority HB CC 5B031
  • G06F3/05,301@F
  • Preventing malfunctions HB CC 5B031
  • G06F3/05,301@G
  • .Compensating offset values HB CC 5B031
  • G06F3/05,301@H
  • .Removing noises in signals HB CC 5B031
  • G06F3/05,301@J
  • .Rationalising input level ranges (including gain adjustments) HB CC 5B031
  • G06F3/05,301@K
  • .DC insulation by photo-couplers transformers HB CC 5B031
  • G06F3/05,301@Z
  • Others HB CC 5B031
  • G06F3/05,311
  • ..Signal processing with A/D conversion HB CC 5B031
  • G06F3/05,311@A
  • Characterised by means of A/D conversion HB CC 5B031
  • G06F3/05,311@B
  • .By using A/D converter, from voltage to frequencies and vise versa HB CC 5B031
  • G06F3/05,311@C
  • .By using A/D converter, from voltage to time and vise versa HB CC 5B031
  • G06F3/05,311@D
  • .By using integrating A/D converter HB CC 5B031
  • G06F3/05,311@M
  • Related to removing noises HB CC 5B031
  • G06F3/05,311@N
  • .A/D conversion synchronised with commercial power supplies HB CC 5B031
  • G06F3/05,311@P
  • Characterised by sampling or holding HB CC 5B031
  • G06F3/05,311@Q
  • .Adaptability control of sampling frequencies HB CC 5B031
  • G06F3/05,311@Z
  • Others HB CC 5B031
  • G06F3/05,321
  • ..Signal processing after A/D conversion HB CC 5B031
  • G06F3/05,321@A
  • Interrupting CPU HB CC 5B031
  • G06F3/05,321@B
  • Changing bit widths HB CC 5B031
  • G06F3/05,321@C
  • Changing magnifications (scales) HB CC 5B031
  • G06F3/05,321@E
  • Removing noises by digital processing HB CC 5B031
  • G06F3/05,321@P
  • Printing out by printers HB CC 5B031
  • G06F3/05,321@Z
  • Others HB CC 5B031
  • G06F3/05,331
  • ...Writing data into memories HB CC 5B031
  • G06F3/05,331@A
  • Compressing data HB CC 5B031
  • G06F3/05,331@Z
  • Others HB CC 5B031
  • G06F3/05,341
  • ..Structures HB CC 5B031
  • G06F3/05,351
  • ..Preventing errors HB CC 5B031
  • G06F3/05,351@A
  • Monitoring or testing HB CC 5B031
  • G06F3/05,351@Z
  • Others HB CC 5B031
  • G06F3/06
  • .Digital input from, or digital output to, record carriers [2006.01] HB CC 5B065
  • G06F3/06,301
  • ..Input or out put control to record carrier HB CC 5B065
  • G06F3/06,301@A
  • Connection control in general; Starting or cutting off input or output devices (cf. F 13) HB CC 5B065
  • G06F3/06,301@B
  • .Multiplexing control e.g. off-line searching; interruption (in general F 9) HB CC 5B065
  • G06F3/06,301@C
  • ..exclusive connection control; Cross calls (shared external memory devices) HB CC 5B065
  • G06F3/06,301@E
  • ...Priority control, changing priority; avoiding deadlock; bus arbiter HB CC 5B065
  • G06F3/06,301@F
  • .Processing input or output commands (F 13 takes priority) HB CC 5B065
  • G06F3/06,301@G
  • .Input or output control (cf. F13) e.g. DMA channel F 13; different function based on different modes Y) HB CC 5B065
  • G06F3/06,301@H
  • .Micro programme control (cf. F 9/22) HB CC 5B065
  • G06F3/06,301@J
  • .Accessing methods; seeking control; R or W control; area control of record carrier (cf. F 12/00, 301) HB CC 5B065
  • G06F3/06,301@K
  • ..Addressing HB CC 5B065
  • G06F3/06,301@L
  • ..Searching control HB CC 5B065
  • G06F3/06,301@M
  • ..Data transfer control e.g. transfer timing, protocol; commencement, ending or interruption of data transfer (cf. F 13) HB CC 5B065
  • G06F3/06,301@N
  • ...Data transfer units; converting data transfer units; converting or calculating transferred data HB CC 5B065
  • G06F3/06,301@P
  • ...Data transfer methods HB CC 5B065
  • G06F3/06,301@R
  • ...Conversion via buffer memories; Serial or parallel conversion (cf. F 5) HB CC 5B065
  • G06F3/06,301@S
  • ....Buffer memory management e.g. R or W control for buffer memories, data operation at buffer memory, area management in general for buffer memory or buffer chain HB CC 5B065
  • G06F3/06,301@T
  • .....Buffer memory management, filling management HB CC 5B065
  • G06F3/06,301@U
  • .....Managing plurality of lines or plurality of buffer levels, switching or using thereof HB CC 5B065
  • G06F3/06,301@V
  • ...Processing of words with variable length, changing lengths,; partial writing access (cf. F 12/04) HB CC 5B065
  • G06F3/06,301@W
  • ....Compressing or restoring (recovering) data HB CC 5B065
  • G06F3/06,301@X
  • ...Data transfer between external memory devices HB CC 5B065
  • G06F3/06,301@Y
  • .Function mode control e.g. transfer mode control or recording density control HB CC 5B065
  • G06F3/06,301@Z
  • Others e.g. initialisation (input or output emulators), volume control (mounting or demounting, auto-changer) HB CC 5B065
  • G06F3/06,302
  • ...Access time reduction control HB CC 5B065
  • G06F3/06,302@A
  • Using buffer memories e.g. prefetching of reading data (disk cash F 12/08, 320); (for high speed access) virtual inputs or outputs (virtual seek Z) HB CC 5B065
  • G06F3/06,302@B
  • Multiplexing control; prefetching of commandss HB CC 5B065
  • G06F3/06,302@D
  • .Multiplexed seeking or searching; interleaving method HB CC 5B065
  • G06F3/06,302@E
  • .Changing process sequence; rearranging data (rearrangement of data is transferred to J) HB CC 5B065
  • G06F3/06,302@H
  • ..Rolling mode method HB CC 5B065
  • G06F3/06,302@J
  • Data layout or format for reducing access time HB CC 5B065
  • G06F3/06,302@Z
  • Others e.g. virtual seeking, multiplexed head or multiplexed data HB CC 5B065
  • G06F3/06,303
  • ...Input or output control inherent to magnetic tape devices HB CC 5B065
  • G06F3/06,303@B
  • Multiplexing processing for magnetic tape devices; off-line access or off-line rewinding HB CC 5B065
  • G06F3/06,303@C
  • Accessing to magnetic tape devices HB CC 5B065
  • G06F3/06,303@E
  • .Data transfer control to and from magnetic tape devices HB CC 5B065
  • G06F3/06,303@G
  • .Reading or writing control to and from magnetic tape devices HB CC 5B065
  • G06F3/06,303@J
  • For cassette tape devices HB CC 5B065
  • G06F3/06,303@Z
  • processing commands inherent to magnetic tape devices HB CC 5B065
  • G06F3/06,304
  • ...Preventing malfunctions HB CC 5B065
  • G06F3/06,304@B
  • By multiplexing e.g. accessing to multiplexing devices; partial multiplexing; volume generation management (File generation management F 12/00, 302) HB CC 5B065
  • G06F3/06,304@E
  • .Double writing or reading HB CC 5B065
  • G06F3/06,304@F
  • .Copying (including copying between different formats); backup processing or updating thereof HB CC 5B065
  • G06F3/06,304@H
  • Protection in general (cf. F 12/14) HB CC 5B065
  • G06F3/06,304@J
  • .Replacing media or loading protections HB CC 5B065
  • G06F3/06,304@K
  • .Write protection e.g. tampering protection; initialising protection HB CC 5B065
  • G06F3/06,304@M
  • .Copy protection (cf. F 12/14) HB CC 5B065
  • G06F3/06,304@N
  • Monitoring; displaying warning or alarms; displaying remaining capacity, counting or displaying access frequency HB CC 5B065
  • G06F3/06,304@P
  • .Logging of error information or history information; damping contents of external memory devices HB CC 5B065
  • G06F3/06,304@R
  • .Diagnosing, testing; measuring (in general F 11) HB CC 5B065
  • G06F3/06,304@T
  • ..Diagnosing or testing with pseudo techniques HB CC 5B065
  • G06F3/06,304@U
  • ..Checking, diagnosing or testing test circuits HB CC 5B065
  • G06F3/06,304@Z
  • Others e.g. data shunting HB CC 5B065
  • G06F3/06,305
  • ....Measures for errors HB CC 5B065
  • G06F3/06,305@A
  • detecting or processing errors HB CC 5B065
  • G06F3/06,305@C
  • .Data expressions with redundancy HB CC 5B065
  • G06F3/06,305@D
  • .Read after write; byte check; loop checking system (G 11 B takes precedence) HB CC 5B065
  • G06F3/06,305@F
  • .Processing after detecting errors e.g. analysing or repairing errors (C takes precedence) HB CC 5B065
  • G06F3/06,305@G
  • ..Postponing error repairs HB CC 5B065
  • G06F3/06,305@H
  • ..Reporting errors (collecting error information F 3/06, 304 P) HB CC 5B065
  • G06F3/06,305@K
  • ..Retrying HB CC 5B065
  • G06F3/06,305@M
  • ...Re-positioning (G 11 B takes precedence) HB CC 5B065
  • G06F3/06,305@Z
  • Others HB CC 5B065
  • G06F3/06,306
  • ....Measures for faults HB CC 5B065
  • G06F3/06,306@B
  • Failed portions e.g. detecting or replacing the faulty tracks HB CC 5B065
  • G06F3/06,306@F
  • .Using the next track as the alternative track HB CC 5B065
  • G06F3/06,306@H
  • .Alternative tracks consisting from separate memory devices HB CC 5B065
  • G06F3/06,306@K
  • .With control table e.g. address conversion table HB CC 5B065
  • G06F3/06,306@Z
  • Others e.g. measures for wear in general, avoiding defects or forced writing of error data HB CC 5B065
  • G06F3/06,540
  • ...Array structures HB CC 5B065
  • G06F3/06,550
  • ...Managing replacement media HB CC 5B065
  • G06F3/08
  • ..from or to individual record carriers, e.g. punched card [2006.01] HB CC 5B065
  • G06F3/08@A
  • Input or output control with the cards HB CC 5B065
  • G06F3/08@C
  • .Input or output control with the IC F4538cards HB CC 5B065
  • G06F3/08@E
  • Disk devices other than magnetic disk devices e.g. input or output control with magnetic bubble disk devices or virtual disk devices (cf. F 3/06, 302 A, F 12/00, 301 Z) (Magnetic bubble disk devices are transferred to H.) HB CC 5B065
  • G06F3/08@F
  • .Optical disk devices e.g. input or output control with additional memory devices HB CC 5B065
  • G06F3/08@H
  • .Input or output control with semiconductor disk devices (including magnetic bubble disk devices) HB CC 5B065
  • G06F3/08@Z
  • Others HB CC 5B065
  • G06F3/09
  • .Digital output to typewriters [2006.01] HB CC 5B021
  • G06F3/12
  • .Digital output to print unit [2006.01] HB CC 5B021
  • G06F3/12,301
  • ..characterised by interface with print system HB CC 5B021
  • G06F3/12,302
  • ...aiming to achieve specific object and effect HB CC 5B021
  • G06F3/12,303
  • ....to improve or ease management of print job HB CC 5B021
  • G06F3/12,304
  • .....to eliminate complicated operation from execution of print job by user or operator, e.g. presetting of print job, automatic execution of print job or use of identification card HB CC 5B021
  • G06F3/12,305
  • .....to ease setting up by supporting or aiding print job setting up, e.g. customization of set up, notice of guidance or conflict or use of job ticket HB CC 5B021
  • G06F3/12,306
  • .....to provide flexible adaptation in formatting of input data, formatting of print job or selecting of type of print job, e.g. conversion of format HB CC 5B021
  • G06F3/12,307
  • .....to notify user result of print after transmission of print job HB CC 5B021
  • G06F3/12,308
  • .....to improve quality of print, e.g. trial print, print preview or image quality adjustment HB CC 5B021
  • G06F3/12,309
  • .....to connect old print protocol device to new print system and print, e.g. conversion or expansion of communication protocol , expansion of function HB CC 5B021
  • G06F3/12,310
  • ....to detect, forecast or recover damage to device, shortage of consumption articles or communication error HB CC 5B021
  • G06F3/12,311
  • ....to improve performance of print processing HB CC 5B021
  • G06F3/12,312
  • .....to shorten time between start of print job and start of printing by printer HB CC 5B021
  • G06F3/12,313
  • ......to quicken starting time of printing in device print job is temporarily stored or in printer executing printing HB CC 5B021
  • G06F3/12,314
  • ......to quicken starting time of transmission in derive transmitting print job HB CC 5B021
  • G06F3/12,315
  • .....to shorten time between start of printing and finish of printing in printer HB CC 5B021
  • G06F3/12,317
  • .....to shorten spare time or stop time due to difficulties in printer, e.g. dispersion printing HB CC 5B021
  • G06F3/12,318
  • ....to cut down or save amount used of consumption articles of printer; to use printer or hardware resource of client effectively HB CC 5B021
  • G06F3/12,319
  • .....to cut down or save amount used of consumption articles of printer HB CC 5B021
  • G06F3/12,320
  • .....to use printer or hardware resource of client effectively, e.g. memory or CPU HB CC 5B021
  • G06F3/12,321
  • .....to cut down electricity consumption of printer HB CC 5B021
  • G06F3/12,322
  • ....to reinforce security for print job HB CC 5B021
  • G06F3/12,323
  • ...characterised by specific technology for executing print job HB CC 5B021
  • G06F3/12,324
  • ....resource management for client or server HB CC 5B021
  • G06F3/12,325
  • .....updating software in client or server, e.g. updating printer driver, plug in or font HB CC 5B021
  • G06F3/12,326
  • .....selection or search of printer adapted to print set up HB CC 5B021
  • G06F3/12,327
  • .....using printer definition file, e.g. GPD or PPD HB CC 5B021
  • G06F3/12,328
  • .....transmitting print job without exclusive printer driver; transmitting print job using all-purpose printer driver HB CC 5B021
  • G06F3/12,329
  • ....management or maintenance of printer, e.g. state of power, operation or breakdown HB CC 5B021
  • G06F3/12,330
  • .....management of software or firmware of printer, e.g. updating or installation of software, firmware or font HB CC 5B021
  • G06F3/12,331
  • .....setting up related to printer, e.g. setting up of IP address, name or individual information HB CC 5B021
  • G06F3/12,332
  • .....obtaining information on printer performance, e.g. as responding to demand or obtain periodically HB CC 5B021
  • G06F3/12,334
  • .....processing of error and recovery, e.g. re-print processing HB CC 5B021
  • G06F3/12,335
  • ......by shortage of consumption article, e.g. blank form or tonner HB CC 5B021
  • G06F3/12,336
  • ....characterised by connection between communication devices, e.g. client and server, server and printer, printer and printer HB CC 5B021
  • G06F3/12,337
  • ....managing print job HB CC 5B021
  • G06F3/12,338
  • .....characterised by security for print, e.g. user identification, blanking of confidential information on page or confidential printing HB CC 5B021
  • G06F3/12,339
  • .....use of printer within restricted area; restriction of usage on printer function HB CC 5B021
  • G06F3/12,340
  • .....concurrency of print or ripping conversion HB CC 5B021
  • G06F3/12,341
  • .....division of print job responsive to print set up, e.g. black and white page and colour page, book cover and contents or tab HB CC 5B021
  • G06F3/12,342
  • .....characterised by arrangement or insertion of object on page HB CC 5B021
  • G06F3/12,343
  • ......variable print, e.g. insertion of identification code, stamp, water mark, title, logo, advertisement or coupon on page; form printing HB CC 5B021
  • G06F3/12,344
  • .....conversion or analysis of print job, e.g. band processing, change colour, font conversion or deleting overlapping data on page HB CC 5B021
  • G06F3/12,345
  • ......conversion to intermediate print data or common print data, e.g. PDF, EMF or XPS HB CC 5B021
  • G06F3/12,346
  • ......analysing print job written by markup language, e.g. XSL, XML or HTML HB CC 5B021
  • G06F3/12,347
  • ......convert to print data processable by printer HB CC 5B021
  • G06F3/12,348
  • ......analyse print data and determine printer language; analyse printer language and determine print processing HB CC 5B021
  • G06F3/12,350
  • .....page layout or allocation of page on recording medium, e.g. duplex, collective printing, book binding, variable power or borderless printing HB CC 5B021
  • G06F3/12,351
  • ......applied to continuous recording medium, e.g. web paper or roll paper HB CC 5B021
  • G06F3/12,352
  • ......applied to special recording medium in sheet HB CC 5B021
  • G06F3/12,353
  • .....setting up parameter of print job, e.g. UI being used by client HB CC 5B021
  • G06F3/12,354
  • ......automatically setting up parameter, e.g. automatic setup by printer driver HB CC 5B021
  • G06F3/12,355
  • ......prevent occurrence of inconveniences to parameter, e.g. restrict range of setup, notice of inconvenience or dissolution of inconveniences HB CC 5B021
  • G06F3/12,356
  • ......Feedback to user before printing, e.g. print preview, test print, trial print or pre-print check HB CC 5B021
  • G06F3/12,357
  • ......use stored parameter, template, initial value or print style HB CC 5B021
  • G06F3/12,358
  • ......print set up for print job being changed by operation on printer, e.g. printing job in operation or accumulated printing job HB CC 5B021
  • G06F3/12,359
  • .....monitoring print job, e.g. obtain print job status HB CC 5B021
  • G06F3/12,360
  • .....scheduling of print job, e.g. print job queuing or allocation of printer HB CC 5B021
  • G06F3/12,361
  • ......alternative print by other printer, e.g. print error, shortage of consumption articles or expected delay HB CC 5B021
  • G06F3/12,362
  • ......grouping, ganging or uniting HB CC 5B021
  • G06F3/12,363
  • ......based on priority order of print job, e.g. change of order of execution or cut-in print HB CC 5B021
  • G06F3/12,364
  • ......allocate post-treatment device according to print job set up, e.g. folding, cutting, binding or bookbinding HB CC 5B021
  • G06F3/12,365
  • .....execute print job by designating location of print data, e.g. designation of URL or file pass HB CC 5B021
  • G06F3/12,367
  • .....accumulation for confidential print; accumulation for time designated print; accumulation for re-print HB CC 5B021
  • G06F3/12,368
  • .....transmit print request and print data independently; transmit print request by designating cellular phone terminal or web browser HB CC 5B021
  • G06F3/12,369
  • ......transmitting print data from distribution server, e.g. reservation transmission or transmission service of print data HB CC 5B021
  • G06F3/12,370
  • ......using hot file HB CC 5B021
  • G06F3/12,371
  • ......prepare new print job and print using print data accumulated in printer or server, e.g. box print HB CC 5B021
  • G06F3/12,372
  • ......digital shop, e.g. electronics order, print service via web or job transmission from remote transmission screen HB CC 5B021
  • G06F3/12,373
  • .....preparation, management or use of print job record, e.g. tracking log, billing or print passage HB CC 5B021
  • G06F3/12,374
  • .....given conditions, e.g. delete or cancel print job based on memory free space or privacy HB CC 5B021
  • G06F3/12,375
  • ....work flow management of print job, e.g. definition or change of work flow HB CC 5B021
  • G06F3/12,376
  • .....manage print work flow in printer driver of client or server HB CC 5B021
  • G06F3/12,377
  • .....work flow being constructed by pipelining of filter HB CC 5B021
  • G06F3/12,378
  • ...characterised by specific structure of print system HB CC 5B021
  • G06F3/12,379
  • ....characterised by printer controller, e.g. hardware composition HB CC 5B021
  • G06F3/12,380
  • ....for direct print, e.g. print from movable memory media or digital camera HB CC 5B021
  • G06F3/12,381
  • ....connected with printer having multiple print mechanism HB CC 5B021
  • G06F3/12,382
  • ....for connecting with large scale printer HB CC 5B021
  • G06F3/12,384
  • ....for connecting with local printer, e.g. connection by serial port, parallel port or USB port HB CC 5B021
  • G06F3/12,385
  • ....for connecting with remote printer HB CC 5B021
  • G06F3/12,386
  • .....through local network HB CC 5B021
  • G06F3/12,387
  • .....through internet, e.g. web print HB CC 5B021
  • G06F3/12,388
  • .....connecting construction to become client server printer HB CC 5B021
  • G06F3/12,389
  • .....connecting construction to become server client printer, printer being invisible from server HB CC 5B021
  • G06F3/12,390
  • .....connecting construction to become server printer client, e.g. client not communicating with server HB CC 5B021
  • G06F3/12,391
  • ....printer having means to store print data and manage print data by itself HB CC 5B021
  • G06F3/12,392
  • ....data input/output between cellular phone terminal and printer, e.g. radio print from cellular phone terminal HB CC 5B021
  • G06F3/12,393
  • ..characterised by communication of printer information with computer HB CC 5B021
  • G06F3/12,394
  • ...Feedback on notice of condition or exchange of information HB CC 5B021
  • G06F3/12,395
  • ...Buffer means HB CC 5B021
  • G06F3/12,396
  • ..scheduling or printer resource handling HB CC 5B021
  • G06F3/12,397
  • ..translation, conversion , emulation or compression to printer code; setting printer parameter HB CC 5B021
  • G06F3/12,398
  • ...convert printer language, e.g. program control language or page description language HB CC 5B021
  • G06F3/13
  • .Digital output to plotter [2006.01] HB CC 5B051
  • G06F3/13,310
  • ..Devices HB CC 5B051
  • G06F3/13,310@A
  • Flat-bed plotters HB CC 5B051
  • G06F3/13,310@B
  • Drum plotters HB CC 5B051
  • G06F3/13,310@C
  • Ball point pen plotters HB CC 5B051
  • G06F3/13,310@D
  • Inkjet plotters HB CC 5B051
  • G06F3/13,310@E
  • Thermal plotters HB CC 5B051
  • G06F3/13,310@F
  • Static-electricity plotters HB CC 5B051
  • G06F3/13,310@G
  • Optical plotters HB CC 5B051
  • G06F3/13,310@H
  • Color plotters HB CC 5B051
  • G06F3/13,310@J
  • Self-running plotters HB CC 5B051
  • G06F3/13,310@K
  • Mechanisms or structures HB CC 5B051
  • G06F3/13,310@L
  • Paper devices, feeding or detecting paper level HB CC 5B051
  • G06F3/13,310@M
  • Feeding ink or detecting ink level HB CC 5B051
  • G06F3/13,310@N
  • Generating character patterns HB CC 5B051
  • G06F3/13,310@P
  • Generating vectors HB CC 5B051
  • G06F3/13,310@Q
  • Generating arcs or curves HB CC 5B051
  • G06F3/13,310@R
  • Preparing graphs, figures or tables HB CC 5B051
  • G06F3/13,310@Z
  • Others HB CC 5B051
  • G06F3/13,320
  • ..Controlling HB CC 5B051
  • G06F3/13,320@A
  • Transferring data of interfacing with host HB CC 5B051
  • G06F3/13,320@B
  • Plotter controllers HB CC 5B051
  • G06F3/13,320@C
  • Managing drawing programs or output drawings HB CC 5B051
  • G06F3/13,320@D
  • Dialogues with systems HB CC 5B051
  • G06F3/13,320@E
  • Displaying situations HB CC 5B051
  • G06F3/13,320@F
  • Preventing malfunctioning or measures for errors HB CC 5B051
  • G06F3/13,320@G
  • Setting drawing ranges HB CC 5B051
  • G06F3/13,320@H
  • Trial writing HB CC 5B051
  • G06F3/13,320@J
  • Detecting or reading coordinate positions HB CC 5B051
  • G06F3/13,320@K
  • Processing drawing data HB CC 5B051
  • G06F3/13,320@L
  • Vector or raster scanning HB CC 5B051
  • G06F3/13,320@M
  • Enlargement or reduction processing HB CC 5B051
  • G06F3/13,320@N
  • Interpolation or compensation processing HB CC 5B051
  • G06F3/13,320@P
  • 3D and hidden line processing HB CC 5B051
  • G06F3/13,320@Q
  • Line types, line widths and gradation HB CC 5B051
  • G06F3/13,320@R
  • Inspecting drawn image quality HB CC 5B051
  • G06F3/13,320@S
  • Controlling the pen head drive HB CC 5B051
  • G06F3/13,320@T
  • Controlling the pen head speed HB CC 5B051
  • G06F3/13,320@U
  • Optimising the pen head travel HB CC 5B051
  • G06F3/13,320@V
  • Controlling home positioning of pen head HB CC 5B051
  • G06F3/13,320@W
  • Selecting or replacing the recording pens HB CC 5B051
  • G06F3/13,320@X
  • Vertical motion control of the recording pens HB CC 5B051
  • G06F3/13,320@Z
  • Others HB CC 5B051
  • G06F3/14
  • .Digital output to display device [2006.01] HB CC 5B069
  • G06F3/14@A
  • In general HB CC 5B069
  • G06F3/14@Z
  • Others HB CC 5B069
  • G06F3/14,310
  • ..Related to processing HB CC 5B069
  • G06F3/14,310@A
  • In general HB CC 5B069
  • G06F3/14,310@B
  • Editing HB CC 5B069
  • G06F3/14,310@C
  • Formatting or screen definition HB CC 5B069
  • G06F3/14,310@D
  • Tables or ruled lines HB CC 5B069
  • G06F3/14,310@E
  • Related to programmes HB CC 5B069
  • G06F3/14,310@Z
  • Others HB CC 5B069
  • G06F3/14,320
  • ...Displaying system statuses HB CC 5B069
  • G06F3/14,320@A
  • Displaying statuses or situations HB CC 5B069
  • G06F3/14,320@B
  • Testing or diagnosing HB CC 5B069
  • G06F3/14,320@C
  • Monitoring processes or plants HB CC 5B069
  • G06F3/14,320@D
  • Monitors HB CC 5B069
  • G06F3/14,320@Z
  • Others HB CC 5B069
  • G06F3/14,330
  • ...For guidance or assisting helps for operation HB CC 5B069
  • G06F3/14,330@A
  • In general HB CC 5B069
  • G06F3/14,330@Z
  • Others HB CC 5B069
  • G06F3/14,340
  • ....Systems e.g. for dialogues with OS HB CC 5B069
  • G06F3/14,340@A
  • Dialogues HB CC 5B069
  • G06F3/14,340@B
  • Menu HB CC 5B069
  • G06F3/14,340@C
  • Messages e.g. message display methods HB CC 5B069
  • G06F3/14,340@D
  • Highlighted display HB CC 5B069
  • G06F3/14,340@Z
  • Others HB CC 5B069
  • G06F3/14,350
  • .....Multi-windows HB CC 5B069
  • G06F3/14,350@A
  • In general HB CC 5B069
  • G06F3/14,350@B
  • Diving screen HB CC 5B069
  • G06F3/14,350@C
  • Multi-job display HB CC 5B069
  • G06F3/14,350@Z
  • Others HB CC 5B069
  • G06F3/14,360
  • ...Selecting display screen HB CC 5B069
  • G06F3/14,360@A
  • In general HB CC 5B069
  • G06F3/14,360@B
  • Virtual logic screens HB CC 5B069
  • G06F3/14,360@C
  • Searching HB CC 5B069
  • G06F3/14,360@D
  • Scrolling HB CC 5B069
  • G06F3/14,360@Z
  • Others HB CC 5B069
  • G06F3/14,370
  • ....Selecting icons HB CC 5B069
  • G06F3/14,370@A
  • In general HB CC 5B069
  • G06F3/14,370@Z
  • Others HB CC 5B069
  • G06F3/14,380
  • ....Selecting cursor patterns HB CC 5B069
  • G06F3/14,380@A
  • In general HB CC 5B069
  • G06F3/14,380@B
  • Controlling cursors HB CC 5B069
  • G06F3/14,380@Z
  • Others HB CC 5B069
  • G06F3/14,400
  • ..related to data HB CC 5B069
  • G06F3/147
  • ..using display panels [2006.01] HB CC 5B069
  • G06F3/147,310
  • ...For data transfer HB CC 5B069
  • G06F3/147,320
  • ...For displaying numeric values HB CC 5B069
  • G06F3/153
  • ..using cathode-ray tubes [2006.01] HB CC 5B069
  • G06F3/153,310
  • ...By using character displays HB CC 5B069
  • G06F3/153,320
  • ...By using graphic display HB CC 5B069
  • G06F3/16
  • .Sound input; Sound output (speech processing G10L) HB CC 5B026
  • G06F3/16,400
  • ..interface with exclusive audio device, e.g. interface with audio driver or CODE HB CC 5B026
  • G06F3/16,410
  • ...Sound responding equipment using telephone lines HB CC 5B026
  • G06F3/16,500
  • ..managing audio stream, e.g. setting volume or audio stream bus HB CC 5B026
  • G06F3/16,510
  • ...Controlling input levels HB CC 5B026
  • G06F3/16,520
  • ...Setting sound input duration HB CC 5B026
  • G06F3/16,530
  • ...Setting sound input duration or output locations HB CC 5B026
  • G06F3/16,540
  • ...controlling sound volume, sound quality or sound speed HB CC 5B026
  • G06F3/16,550
  • ...no-sound processing at sound output time HB CC 5B026
  • G06F3/16,600
  • ..audio in user interface, e.g. using voice command for navigation, audio feedback HB CC 5B026
  • G06F3/16,610
  • ...Combination with other sound input devices HB CC 5B026
  • G06F3/16,620
  • ...use other display device together HB CC 5B026
  • G06F3/16,630
  • ...Commanding using sound commands HB CC 5B026
  • G06F3/16,640
  • ...Collation of speakers HB CC 5B026
  • G06F3/16,650
  • ...user interface using voice recognition HB CC 5B026
  • G06F3/16,660
  • ...voice guidance, e.g. remote operating method HB CC 5B026
  • G06F3/16,670
  • ...Confirmations by answer back HB CC 5B026
  • G06F3/16,680
  • ...reporting state of action or state of abnormality HB CC 5B026
  • G06F3/16,690
  • ...user interface using synthesizing sounds HB CC 5B026
  • G06F3/18
  • .Digital input from automatic curve follower [2006.01] HB CC 5B041
    TOP