This page displays all 「FI」 in main group F16B39/00. |
HB:Handbook | ||||
CC:Concordance |
|
Locking of screws, bolts, or nuts (wall-dowels F16B 13/00; locking of bottle closures B65D; locking of rail-fastening bolts for permanent ways E01B 9/12; locking of fastening means for railway fishplates E01B 11/38; locking devices for valves or cocks F16K) | HB | CC | 3J034 | |
|
.specially adapted to prevent loosening at extreme temperatures | HB | CC | 3J034 | |
|
Fasteners made of shape memory alloy | HB | CC | 3J034 | |
|
Others (axial tension adjustment F16B 31/04) | HB | CC | 3J034 | |
|
.in which the locking takes place after screwing down (F16B 39/01 takes precedence; split-pins, circlips, or the like for preventing relative axial movement only F16B 21/10; fastening nuts by welding or riveting F16B 37/06) | HB | CC | 3J034 | |
|
by adhesive (bolts or nuts with adhesive F16B 39/22) | HB | CC | 3J034 | |
|
by bending or swaging a part of a bolt or a nut | HB | CC | 3J034 | |
|
.Inserting pins, taper bolts or the like in holes or slots made in bolts to expand bolts | HB | CC | 3J034 | |
|
By swaging objects | HB | CC | 3J034 | |
|
by welding | HB | CC | 3J034 | |
|
by circlips | HB | CC | 3J034 | |
|
with members inserting into through holes or threaded holes in bolts or nuts, e.g. pins, screws and nails (with a member penetrating screw-threaded surface F16B 39/04) | HB | CC | 3J034 | |
|
.Nuts | HB | CC | 3J034 | |
|
..with slits | HB | CC | 3J034 | |
|
Others | HB | CC | 3J034 | |
|
..with a member penetrating the screw-threaded surface of at least one part, e.g. a pin, wedge, cotter-pin, screw | HB | CC | 3J034 | |
|
Bolt shaft sections with holes or slots | HB | CC | 3J034 | |
|
.through holes or cross slots in the shaft vertical direction [figure] | HB | CC | 3J034 | |
|
..Inserting cotter pins | HB | CC | 3J034 | |
|
Others (with members to be fit other than threads F16B 39/02) | HB | CC | 3J034 | |
|
...with a pin or staple parallel to the bolt axis | HB | CC | 3J034 | |
|
..with a cap interacting with the nut, connected to the bolt by a pin or cotter-pin | HB | CC | 3J034 | |
|
..by a plate or ring immovable with regard to the bolt or object (F16B 39/08 takes precedence) | HB | CC | 3J034 | |
|
Plates or rings with hexagon holes or hexagon convex sections or the like which fit into bolt head sections or nuts | HB | CC | 3J034 | |
|
.Holes to be press fitted | HB | CC | 3J034 | |
|
.Hexagon convex sections | HB | CC | 3J034 | |
|
Plates or rings fitted in slits made in bolts or nuts | HB | CC | 3J034 | |
|
to multiple bolts or nuts (F16B 39/10A to F16B 39/10D take precedence) | HB | CC | 3J034 | |
|
Attaching plates or rings to both bolts and nuts (washers F16B 39/24) | HB | CC | 3J034 | |
|
Others (fixing bolts and nuts themselves F16B 39/02) | HB | CC | 3J034 | |
|
..by means of locknuts | HB | CC | 3J034 | |
|
having shape like [figure] | HB | CC | 3J034 | |
|
by way of washers or similar members between nut and locknut | HB | CC | 3J034 | |
|
.by way of folding washers | HB | CC | 3J034 | |
|
Tilting locknut bearing surface | HB | CC | 3J034 | |
|
Others | HB | CC | 3J034 | |
|
...made of thin sheet material or formed as spring washers (locknuts per se made of thin sheet material F16B 37/02) | HB | CC | 3J034 | |
|
...in which the screw-thread of the locknut differs from that of the nut | HB | CC | 3J034 | |
|
....in which the locknut grips with screw-thread in the nuts as well as on the bolt | HB | CC | 3J034 | |
|
..by means of steel wire or the like (F16B 39/10 takes precedence) | HB | CC | 3J034 | |
|
Steel wires screwed with bolts or nut threads | HB | CC | 3J034 | |
|
Other (steel wires preventing looseness while fastening screws F16B 39/22C) | HB | CC | 3J034 | |
|
.in which the locking takes place during screwing down or tightening (F16B 39/01 takes precedence) | HB | CC | 3J034 | |
|
One side of a thread coated by synthetic resin or similar things | HB | CC | 3J034 | |
|
Bolts or nuts with adhesive (applying adhesive after fastening screws F16B 39/02) | HB | CC | 3J034 | |
|
by steel wires or similar things (using steel wires after fastening screws F16B 39/20) | HB | CC | 3J034 | |
|
Others | HB | CC | 3J034 | |
|
..by means of washers, spring washers, or resilient plates that lock against the object (locking to the screw-thread F16B 39/14, F16B 39/36) | HB | CC | 3J034 | |
|
by spring washers (made of synthetic resin F16B 39/24G) | HB | CC | 3J034 | |
|
.with engaging teeth or engaging nails | HB | CC | 3J034 | |
|
by washers with nails or teeth for preventing reversing (spring washers with teeth F16B 39/24L) | HB | CC | 3J034 | |
|
.with irregularities or sawteeth on bolt head or nut engaging teeth on washer | HB | CC | 3J034 | |
|
by folding washers (F16B 39/24E takes precedence; folding unmovable plates with respect to bolts or objects F16B 39/10) | HB | CC | 3J034 | |
|
by wire washers (coil springs in general F16F) | HB | CC | 3J034 | |
|
by compound washers | HB | CC | 3J034 | |
|
by quasi-washers; objects themselves working as washers [figure] | HB | CC | 3J034 | |
|
Made of synthetic resin (seal washers F16B 43/00) | HB | CC | 3J034 | |
|
Others | HB | CC | 3J034 | |
|
...with spring washers fastened to the nut or bolt-head | HB | CC | 3J034 | |
|
Washers fastened to the bolt [figure] | HB | CC | 3J034 | |
|
.Fastening washers before roll threading; Deforming under-head sections after fitting washers | HB | CC | 3J034 | |
|
.Supporting washers by using synthetic resin rings | HB | CC | 3J034 | |
|
.Fitting washers into under-head sections and deforming washers | HB | CC | 3J034 | |
|
Others, e.g. washer assembly nuts | HB | CC | 3J034 | |
|
..by special members on, or shape of, the nut or bolt (F16B 39/26 takes precedence; locknuts F16B 39/12) | HB | CC | 3J034 | |
|
Snap fitting of bolts and nuts | HB | CC | 3J034 | |
|
Plastic deformation of a part of the nut | HB | CC | 3J034 | |
|
Close fitting bolt head section into counterbore | HB | CC | 3J034 | |
|
Others | HB | CC | 3J034 | |
|
...Locking by means of special shape of work-engaging surfaces, e.g. notched or toothed nuts | HB | CC | 3J034 | |
|
with concave sections or slots on the bearing surface, teeth not being extruded from the bearing surface | HB | CC | 3J034 | |
|
with continuous sawteeth [figure] | HB | CC | 3J034 | |
|
having protrusions shape like [figure] or [figure] | HB | CC | 3J034 | |
|
Others (tapping screws with countersinking heads F16B 25/00B, nail-like bearing surface F16B 39/32) | HB | CC | 3J034 | |
|
...Locking by means of elastic deformation (F16B 39/38 takes precedence) | HB | CC | 3J034 | |
|
Nuts with non-circular collars protruding at the end surface; nuts whose center sections of holes are elliptic | HB | CC | 3J034 | |
|
Nuts whose pitches of the second threads are deviated [figure] | HB | CC | 3J034 | |
|
Nuts whose threads around tip sections are deformed inward (F16B 39/284A takes precedence) [figure] | HB | CC | 3J034 | |
|
Tilted bearing surface or similar things [figure] | HB | CC | 3J034 | |
|
Flange surface making elastic deformation [figure] | HB | CC | 3J034 | |
|
Others (preventing looseness by using bolts and nuts with slits F16B 39/286) | HB | CC | 3J034 | |
|
....caused by saw cuts | HB | CC | 3J034 | |
|
Set to bolts and screws | HB | CC | 3J034 | |
|
Nuts with a slit in the axis direction (quickly-detachable nuts F16B 37/08) [figure] | HB | CC | 3J034 | |
|
Others | HB | CC | 3J034 | |
|
...Locking exclusively by special shape of the screw-thread | HB | CC | 3J034 | |
|
Threads with slits | HB | CC | 3J034 | |
|
Sawtooth-shaped top sections [figure] | HB | CC | 3J034 | |
|
with irregularity on the flank surface | HB | CC | 3J034 | |
|
Making plastic deformation when threads are screwed | HB | CC | 3J034 | |
|
different pitches | HB | CC | 3J034 | |
|
Taper screws (pipe couplings F16L) | HB | CC | 3J034 | |
|
Others (special threads of tapping screws F16B 25/00) | HB | CC | 3J034 | |
|
...Locking by means of a pawl or pawl-like tongue | HB | CC | 3J034 | |
|
with nails or slot sections engaging with nails on shaft external surface of bolts or screws | HB | CC | 3J034 | |
|
Others, e.g. attached to the bearing surface | HB | CC | 3J034 | |
|
...Locking by deformable inserts or like parts | HB | CC | 3J034 | |
|
Nuts | HB | CC | 3J034 | |
|
.Free spinning type [figure] | HB | CC | 3J034 | |
|
.Prevailing torque type, e.g. nuts including nylon [figure] | HB | CC | 3J034 | |
|
.Special type including nylon [figure] | HB | CC | 3J034 | |
|
Others, e.g. bolts and screws | HB | CC | 3J034 | |
|
...with conical locking parts, which may be split, including use of separate rings co-operating therewith | HB | CC | 3J034 | |
|
...with a second part of the screw-thread which may be resiliently mounted (F16B 39/30 takes precedence) | HB | CC | 3J034 | |
|
Second parts made of steel wires (coil spring insert F16B 37/12) | HB | CC | 3J034 | |
|
Others, e.g. so-called U-nuts | HB | CC | 3J034 | |