FI (list display)

  • B66C1/00
  • Load-engaging elements or devices attached to lifting, lowering, or hauling gear of cranes, or adapted for connection therewith for transmitting forces to articles or groups of articles (fastening to cables or ropes F16G 11/00) HB CC 3F004
  • B66C1/02
  • .by suction means HB CC 3F004
  • B66C1/02@A
  • mounted on suspension beam, e.g. vacuum lifts (suspension beams 1/10 A) HB CC 3F004
  • B66C1/02@B
  • structures of suction pads (suction cups aiming at mounting F 16 B 47/00) HB CC 3F004
  • B66C1/02@C
  • Suction control, circuits HB CC 3F004
  • B66C1/02@D
  • supporting single suction device HB CC 3F004
  • B66C1/02@E
  • Bernoulli type HB CC 3F004
  • B66C1/02@Z
  • Others HB CC 3F004
  • B66C1/04
  • .by magnetic means HB CC 3F004
  • B66C1/06
  • ..electromagnetic HB CC 3F004
  • B66C1/06@A
  • mounted on suspension beams (B to Q take precedence. Suspension beams 1/10 A) HB CC 3F004
  • B66C1/06@B
  • Safety devices, e.g. with auxiliary members for preventing falling of suspended articles upon power failures or accidents HB CC 3F004
  • B66C1/06@C
  • for overturning or rotating (auxiliary devices for overturning or rotating 13/08) HB CC 3F004
  • B66C1/06@D
  • adapted to match with profile of articles HB CC 3F004
  • B66C1/06@E
  • .with movable magnetic poles HB CC 3F004
  • B66C1/06@F
  • selective lifting of articles, e.g. lifting of steel plates after selecting number of plates, selecting lifting between thin or thick plates) (control thereof 1/08 C) HB CC 3F004
  • B66C1/06@G
  • .with movable magnetic poles HB CC 3F004
  • B66C1/06@H
  • Using of permanent magnet steels as structural members for magnetic circuits, e.g. cores or yokes (e.g. permanent magnet type suspension solenoid) HB CC 3F004
  • B66C1/06@J
  • Lifting magnet structures (solenoids in general without armature H 01 F 7/20) HB CC 3F004
  • B66C1/06@P
  • .with dampers HB CC 3F004
  • B66C1/06@Q
  • .Forced cooling HB CC 3F004
  • B66C1/06@K
  • with auxiliary members for mechanically severing attracted articles HB CC 3F004
  • B66C1/06@L
  • with auxiliary devices for positioning, cantering or guide (indicating positions 13/46) HB CC 3F004
  • B66C1/06@M
  • mounted on jib HB CC 3F004
  • B66C1/06@N
  • specially adapted for handling bulky articles, e.g. scrap metals HB CC 3F004
  • B66C1/06@Z
  • Others HB CC 3F004
  • B66C1/08
  • ...Circuits therefor (for electromagnets in general H01F 7/18) HB CC 3F004
  • B66C1/08@C
  • for selective lifting of articles, e.g. selecting number of steel plates to be lifted, selection between thin or thick plates HB CC 3F004
  • B66C1/08@D
  • detecting landing, detecting attracting, positioning (indicating positions 13/46) HB CC 3F004
  • B66C1/08@E
  • Magnetising or de-magnetising; switching between positive or negative magnetising; de-magnetising residual magnetism, power feed (arrangements of power feed cables 13/12); safety devices, e.g. with emergency power supply; alarms HB CC 3F004
  • B66C1/08@Z
  • Others HB CC 3F004
  • B66C1/10
  • .by mechanical means HB CC 3F004
  • B66C1/10@A
  • Suspension beams (H to X take precedence) HB CC 3F004
  • B66C1/10@B
  • .Telescopic beams HB CC 3F004
  • B66C1/10@C
  • .Slings movable along beams HB CC 3F004
  • B66C1/10@G
  • .Foldable beams HB CC 3F004
  • B66C1/10@H
  • Spreaders used for containers HB CC 3F004
  • B66C1/10@J
  • .characterised by connections HB CC 3F004
  • B66C1/10@K
  • ..Twist locked type (including checking of locking) HB CC 3F004
  • B66C1/10@L
  • .characterised by controls, e.g. safety devices HB CC 3F004
  • B66C1/10@M
  • ..hydraulic HB CC 3F004
  • B66C1/10@N
  • ..electric HB CC 3F004
  • B66C1/10@P
  • .Container guides, e.g. guide flippers, aligning arms HB CC 3F004
  • B66C1/10@Q
  • .for multiple containers; spreader connecting devices, e.g. telescopic HB CC 3F004
  • B66C1/10@R
  • .Bracings HB CC 3F004
  • B66C1/10@S
  • .Adjusting positions, e.g. minute movement, trimming, turning HB CC 3F004
  • B66C1/10@T
  • ..with position detectors, e.g. equalising beams, detecting landing HB CC 3F004
  • B66C1/10@U
  • .Power feed (arrangements of power feed cables 13/12); fuelling HB CC 3F004
  • B66C1/10@V
  • .for stacker cranes HB CC 3F004
  • B66C1/10@W
  • .for forklifts, e.g. single ended spreaders, legs) HB CC 3F004
  • B66C1/10@X
  • .Special purposes: special applications HB CC 3F004
  • B66C1/10@Z
  • Others HB CC 3F004
  • B66C1/12
  • ..Slings comprising chains, wires, ropes, or bands; Nets (article side grippers suspended by ropes or chains from crane hooks B66C 1/42) HB CC 3F004
  • B66C1/12@A
  • Slings, e.g. slinging ropes HB CC 3F004
  • B66C1/12@B
  • .Profiles; structures (rope or cable structures in general D 07 B 1/00) HB CC 3F004
  • B66C1/12@D
  • .Auxiliary devices for slinging work HB CC 3F004
  • B66C1/12@E
  • ..Sling expanders or setters HB CC 3F004
  • B66C1/12@F
  • ..with elastic bodies for shrinking slings when not used, e.g. spring (e.g. for preventing disengagement N, for slings with hook 1/14 H) HB CC 3F004
  • B66C1/12@G
  • ..Automatic slinging devices HB CC 3F004
  • B66C1/12@H
  • .for choke slinging (slings with hooks 1/14 B) HB CC 3F004
  • B66C1/12@J
  • .for overturning or rotating (auxiliary devices for overturning or rotating 13/08) HB CC 3F004
  • B66C1/12@K
  • .mainly for towing articles HB CC 3F004
  • B66C1/12@L
  • .Auxiliary devices (D takes precedence) HB CC 3F004
  • B66C1/12@M
  • ..Protectors or retainers for articles, e.g. backing plates, corner protections (for tying packages B 65 D 59/00, 71/04) stoppers (for slings with hooks 1/14 J) HB CC 3F004
  • B66C1/12@N
  • ..Stoppers (for slings with hooks 1/18 G) HB CC 3F004
  • B66C1/12@P
  • Nets, e.g. straw mats (consisting of strip slings 1/18 G) HB CC 3F004
  • B66C1/12@Q
  • .Safety devices, e.g. indicating overloading or life HB CC 3F004
  • B66C1/12@R
  • .Sling chain hooks HB CC 3F004
  • B66C1/12@Z
  • Others HB CC 3F004
  • B66C1/14
  • ...Slings with hooks HB CC 3F004
  • B66C1/14@A
  • Lifting or towing by winding sling around articles HB CC 3F004
  • B66C1/14@B
  • .Choke slinging HB CC 3F004
  • B66C1/14@C
  • Hookers engaged with articles, e.g. hacker HB CC 3F004
  • B66C1/14@D
  • .Clamp type hackers (horizontal clamps per se 1/48) HB CC 3F004
  • B66C1/14@E
  • .Engaging in holes provided in articles HB CC 3F004
  • B66C1/14@F
  • .Engaging with protrusions or pins provided on articles HB CC 3F004
  • B66C1/14@G
  • Auxiliary devices HB CC 3F004
  • B66C1/14@H
  • .with elastic bodies for shrinking slings when not used, e.g. spring HB CC 3F004
  • B66C1/14@J
  • .Stoppers (preventing hooks from being dislocated) HB CC 3F004
  • B66C1/14@Z
  • Others HB CC 3F004
  • B66C1/16
  • ...Slings with load-engaging platforms or frameworks HB CC 3F004
  • B66C1/18
  • ...Band-type slings HB CC 3F004
  • B66C1/18@A
  • made of metals, e.g. wire rope belts, chain belts, wire mesh belts HB CC 3F004
  • B66C1/18@B
  • made of fabrics, e.g. high polymer fibre sling belts (metal fibres A) HB CC 3F004
  • B66C1/18@D
  • .Safety devices, e.g. indicating overloading or life HB CC 3F004
  • B66C1/18@F
  • .Connecting devices HB CC 3F004
  • B66C1/18@G
  • Nets made of strip slings (made of other slings 1/12 P) HB CC 3F004
  • B66C1/18@Z
  • Others HB CC 3F004
  • B66C1/20
  • ...specially adapted for handling vehicles HB CC 3F004
  • B66C1/22
  • ..Rigid members, e.g. L-shaped members, with parts engaging the under surface of the loads; Crane hooks HB CC 3F004
  • B66C1/22@A
  • suspended from suspension beams (suspension beams 1/10) HB CC 3F004
  • B66C1/22@B
  • Bar or U-shaped hooks HB CC 3F004
  • B66C1/22@Z
  • Others HB CC 3F004
  • B66C1/24
  • ...Single members engaging the loads from one side only HB CC 3F004
  • B66C1/24@A
  • suspended from suspension beams HB CC 3F004
  • B66C1/24@B
  • L-shaped hooks; crane forks (for forklifts B 66 F 9/12) HB CC 3F004
  • B66C1/24@C
  • .with clamping members HB CC 3F004
  • B66C1/24@D
  • C-shaped hooks; claws of claw cranes HB CC 3F004
  • B66C1/24@E
  • .with clamping members HB CC 3F004
  • B66C1/24@F
  • Details; structures HB CC 3F004
  • B66C1/24@Z
  • Others HB CC 3F004
  • B66C1/26
  • ....with means for releasing the loads HB CC 3F004
  • B66C1/28
  • ...Duplicate, e.g. pivoted, members engaging the loads from two sides HB CC 3F004
  • B66C1/28@A
  • engaged by oscillation of articles (J takes precedence) HB CC 3F004
  • B66C1/28@B
  • .Power type HB CC 3F004
  • B66C1/28@C
  • .Non-power type HB CC 3F004
  • B66C1/28@D
  • engaged by horizontal movement of articles (K takes precedence) HB CC 3F004
  • B66C1/28@E
  • .by parallel linkage mechanisms HB CC 3F004
  • B66C1/28@F
  • oscillating or revolving engagement tip of articles (H takes precedence) HB CC 3F004
  • B66C1/28@G
  • .revolving around vertical axis HB CC 3F004
  • B66C1/28@H
  • engaging with flange or protrusion on article head HB CC 3F004
  • B66C1/28@J
  • .Oscillating type HB CC 3F004
  • B66C1/28@K
  • .Horizontal movement type HB CC 3F004
  • B66C1/28@Z
  • Others HB CC 3F004
  • B66C1/30
  • ....and also arranged to grip the sides of the loads HB CC 3F004
  • B66C1/30@A
  • engaged by oscillation of articles (J takes precedence) HB CC 3F004
  • B66C1/30@B
  • .Power type HB CC 3F004
  • B66C1/30@C
  • .Non-power type HB CC 3F004
  • B66C1/30@D
  • engaged by horizontal movement of articles (K takes precedence) HB CC 3F004
  • B66C1/30@E
  • .by parallel linkage mechanisms HB CC 3F004
  • B66C1/30@F
  • oscillating or revolving engagement tip of articles (H takes precedence) HB CC 3F004
  • B66C1/30@G
  • .revolving around vertical axis HB CC 3F004
  • B66C1/30@H
  • engaging with flange or protrusion on article head HB CC 3F004
  • B66C1/30@J
  • .Oscillating type HB CC 3F004
  • B66C1/30@K
  • .Horizontal movement type HB CC 3F004
  • B66C1/30@Z
  • Others HB CC 3F004
  • B66C1/32
  • .....of piled or stacked articles HB CC 3F004
  • B66C1/32@A
  • engaged by oscillation of articles (J takes precedence) HB CC 3F004
  • B66C1/32@B
  • .Power type HB CC 3F004
  • B66C1/32@C
  • .Non-power type HB CC 3F004
  • B66C1/32@D
  • engaged by horizontal movement of articles (K takes precedence) HB CC 3F004
  • B66C1/32@E
  • .by parallel linkage mechanisms HB CC 3F004
  • B66C1/32@F
  • oscillating or revolving engagement tip of articles (H takes precedence) HB CC 3F004
  • B66C1/32@G
  • .revolving around vertical axis HB CC 3F004
  • B66C1/32@H
  • engaging with flange or protrusion on article head HB CC 3F004
  • B66C1/32@J
  • .Oscillating type HB CC 3F004
  • B66C1/32@K
  • .Horizontal movement type HB CC 3F004
  • B66C1/32@Z
  • Others HB CC 3F004
  • B66C1/34
  • ...Crane hooks HB CC 3F004
  • B66C1/34@A
  • Hook profiles; structures (hook in general F 16 B 45/00) HB CC 3F004
  • B66C1/34@B
  • .Laminated hooks HB CC 3F004
  • B66C1/34@C
  • Hook supports; hook blocks (pulleys or blocks B 66 D 3/04) HB CC 3F004
  • B66C1/34@D
  • .With rotating devices HB CC 3F004
  • B66C1/34@E
  • .Preventing from turning; braces (load braces 13/06) HB CC 3F004
  • B66C1/34@F
  • .Electric insulation (electric insulation per se H 01B 3/00, 17/00) HB CC 3F004
  • B66C1/34@G
  • .Damping, gradual falling; inching (damping in general 16 F; inching per se 13/08) HB CC 3F004
  • B66C1/34@H
  • For special purposes (L takes precedence) HB CC 3F004
  • B66C1/34@J
  • .Chains, grabs or hooks HB CC 3F004
  • B66C1/34@K
  • .for lifting and operating buckets; for ladle cranes (laminated hooks B, ladle cranes 17/10) HB CC 3F004
  • B66C1/34@L
  • with means for releasing loads, e.g. by hand operations HB CC 3F004
  • B66C1/34@M
  • .automatic release type: by remote operations (by slackened cables 1/38) (N takes precedence) HB CC 3F004
  • B66C1/34@N
  • .Automatically engaged and disengaged HB CC 3F004
  • B66C1/34@P
  • .releasing by pulling out chucker, e.g. engagement pin HB CC 3F004
  • B66C1/34@Q
  • engagement members with hooks, e.g. shackles that can be automatically engaged or disengaged with hook HB CC 3F004
  • B66C1/34@Z
  • Others HB CC 3F004
  • B66C1/36
  • ....with means, e.g. spring-biased detents, for preventing inadvertent disengagement of loads HB CC 3F004
  • B66C1/36@A
  • stopping members supported by pivot, e.g. can be rotated around horizontal axis (C takes precedence Hooks in general F 16 B 45/02) HB CC 3F004
  • B66C1/36@B
  • .can be rotated around vertical axis HB CC 3F004
  • B66C1/36@C
  • stopping members blocking hook opening by sliding (hooks in general F 16 B 45/04) HB CC 3F004
  • B66C1/36@D
  • with a pair of hook members supported by pivot (hooks in general F 16 B 45/06) HB CC 3F004
  • B66C1/36@E
  • Hook profiles, e.g. with protrusions HB CC 3F004
  • B66C1/36@F
  • preventing hooks from being dislocated on the article suspended when engaged; hooks gripping articles when engaged HB CC 3F004
  • B66C1/36@Z
  • Others HB CC 3F004
  • B66C1/38
  • ....adapted for automatic disengagement from loads on release of cable tensions (for parachutes B64D) HB CC 3F004
  • B66C1/40
  • ....formed or fitted with load-measuring or indicating devices HB CC 3F004
  • B66C1/42
  • ..Gripping members engaging only the external or internal surface of the articles (for handling or stripping castings or ingots during manufacture B22D 29/00) HB CC 3F004
  • B66C1/42@A
  • gripping articles by oscillation of a pair of gripping members (J takes precedence) HB CC 3F004
  • B66C1/42@B
  • .Power type HB CC 3F004
  • B66C1/42@C
  • ..with opening and closing locking mechanisms HB CC 3F004
  • B66C1/42@D
  • .Non-power type HB CC 3F004
  • B66C1/42@E
  • ..with automatic locking mechanisms for opening and closing motions, that is, opening when falling and locking upon rising after engagement HB CC 3F004
  • B66C1/42@F
  • gripping articles by horizontal movement of a pair of gripping members (J takes precedence) HB CC 3F004
  • B66C1/42@G
  • .only one gripping member moving HB CC 3F004
  • B66C1/42@H
  • .by parallel linkage mechanisms HB CC 3F004
  • B66C1/42@J
  • For special purposes HB CC 3F004
  • B66C1/42@K
  • .supporting articles so that they can be rotated or overturned HB CC 3F004
  • B66C1/42@L
  • .engaging with concave on articles, e.g. for wedge blocks (wedge blocks E 02 D 29/00) HB CC 3F004
  • B66C1/42@M
  • .for cylinders or timbers, e.g. log clamps, timber grabs (log loaders B 66 F 9/18) HB CC 3F004
  • B66C1/42@Z
  • Others HB CC 3F004
  • B66C1/44
  • ...and applying frictional forces HB CC 3F004
  • B66C1/44@A
  • gripping articles by oscillation of a pair of gripping members (J takes precedence) HB CC 3F004
  • B66C1/44@B
  • .Power type HB CC 3F004
  • B66C1/44@C
  • ..with opening and closing locking mechanisms HB CC 3F004
  • B66C1/44@D
  • .Non-power type HB CC 3F004
  • B66C1/44@E
  • ..with automatic locking mechanisms for opening and closing motions, that is, opening when falling and locking upon rising after engagement HB CC 3F004
  • B66C1/44@F
  • gripping articles by horizontal movement of a pair of gripping members (J takes precedence) HB CC 3F004
  • B66C1/44@G
  • .only one gripping member moving HB CC 3F004
  • B66C1/44@H
  • .by parallel linkage mechanisms HB CC 3F004
  • B66C1/44@J
  • For special purposes HB CC 3F004
  • B66C1/44@K
  • .supporting articles so that they can be rotated or overturned HB CC 3F004
  • B66C1/44@L
  • .engaging with concave on articles, e.g. for wedge blocks (wedge blocks E 02 D 29/00) HB CC 3F004
  • B66C1/44@M
  • .for cylindrical bodies, timbers or solid rods, e.g. log clamps, timber grabs (log loaders B 66 F 9/18) HB CC 3F004
  • B66C1/44@N
  • ..by tightening; clamp type (for pipe 1/48) HB CC 3F004
  • B66C1/44@P
  • Details; profiles or structures of contacts between gripping members and articles HB CC 3F004
  • B66C1/44@Z
  • Others HB CC 3F004
  • B66C1/46
  • ....by inflatable elements HB CC 3F004
  • B66C1/48
  • ....to vertical edge portions of sheets, tubes, or like thin or thin-walled articles (internally-expanding grippers B66C 1/54) HB CC 3F004
  • B66C1/54
  • ....Internally-expanding grippers for handling hollow articles (B66C 1/46 takes precedence) [2] HB CC 3F004
  • B66C1/56
  • .....for handling tubes HB CC 3F004
  • B66C1/58
  • ...and deforming the articles, e.g. by using gripping members such as tongs or grapples HB CC 3F004
  • B66C1/58@A
  • gripping articles with a pair of gripping members (J takes precedence) HB CC 3F004
  • B66C1/58@B
  • .power type HB CC 3F004
  • B66C1/58@C
  • ..with opening and closing locking mechanisms HB CC 3F004
  • B66C1/58@D
  • .non-power type HB CC 3F004
  • B66C1/58@E
  • ..with automatically opened and closed locking mechanisms, e.g. opened during falling and closed and locked during rising after engagement HB CC 3F004
  • B66C1/58@F
  • gripping articles by horizontal motion of a pair of gripping member (J takes precedence) HB CC 3F004
  • B66C1/58@G
  • .only one gripping member moving HB CC 3F004
  • B66C1/58@H
  • .by parallel linkage mechanisms HB CC 3F004
  • B66C1/58@J
  • for special purposes HB CC 3F004
  • B66C1/58@K
  • .supporting articles so that they can be rotated or overturned HB CC 3F004
  • B66C1/58@L
  • .engaging with concave on articles, e.g. for kenchi blocks HB CC 3F004
  • B66C1/58@M
  • .for cylindrical bodies, timbers or solid rods, e.g. log clamps, timber grabs HB CC 3F004
  • B66C1/58@P
  • Details; profiles or structures of contact portions between gripping members and articles, e.g. tongue punch; replacements thereof HB CC 3F004
  • B66C1/58@Z
  • Others HB CC 3F004
  • B66C1/59
  • ....Tongs for sacks [3] HB CC 3F004
  • B66C1/62
  • ..comprising article-engaging members of a shape complementary to that of the articles to be handled HB CC 3F004
  • B66C1/62@A
  • engaging with head of articles, e.g. bottle neck HB CC 3F004
  • B66C1/62@B
  • for handling cans, e.g. drums, gas cylinders (e.g. drum grippers) HB CC 3F004
  • B66C1/62@C
  • for elongated articles, e.g. cylinders or prisms (e.g. horizontal suspension) (for shaped steels 1/64) HB CC 3F004
  • B66C1/62@E
  • .vertical suspension HB CC 3F004
  • B66C1/62@G
  • vertical suspension of bodies in platy (by clamps 1/48) HB CC 3F004
  • B66C1/62@H
  • for concrete products, e.g. for kenchi blocks or bricks HB CC 3F004
  • B66C1/62@M
  • .for wave blocks HB CC 3F004
  • B66C1/62@N
  • .for U-shaped ditches HB CC 3F004
  • B66C1/62@P
  • ..with members engaged with holes provided in U-shaped ditches (including reinforcing articles for holes provided with U-shaped ditches) HB CC 3F004
  • B66C1/62@Z
  • Others HB CC 3F004
  • B66C1/64
  • ...for T- or I-section beams or girders HB CC 3F004
  • B66C1/66
  • ...for engaging holes, recesses, or abutments on articles specially provided for facilitating handling thereof HB CC 3F004
  • B66C1/66@K
  • unfolded and engaged at bottom rim of articles after inserted into hole in article or hollow portion of hollow article HB CC 3F004
  • B66C1/66@P
  • engagement portions or members for articles; suspension pieces, e.g. eyebolts, eye plates HB CC 3F004
  • B66C1/66@Q
  • .stud bolts for suspending concrete products HB CC 3F004
  • B66C1/66@R
  • .inserting engagement members, e.g. pins into holes of articles from side surface (for U-shaped ditches 1/62 P) HB CC 3F004
  • B66C1/66@Z
  • Others HB CC 3F004
  • B66C1/68
  • .mounted on, or guided by, jibs (jibs B66C 23/64) HB CC 3F004
  • B66C1/68@A
  • Hooks (per se 1/34) HB CC 3F004
  • B66C1/68@B
  • Gripping members (per se 1/42) HB CC 3F004
  • B66C1/68@Z
  • Others, e.g. forks (solenoid devices 1/06 M, grab buckets 3/20) HB CC 3F004
    TOP