THEME CODE |
THEME NAME |
||
2E110 |
Finishing wall |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
GA |
SPECIFIC FUNCTION OF MATERIAL, SHAPE (APPLIED TO ALL RELEVANT SUBJECTS) |
W: Surface materials of decorating panels X: Rear surface materials of decorating panels Y: Undercoats Z: Others [other than W, X and Y (core and junction materials, adhesives, etc.)] |
|
GB |
MATERIAL (APPLIED TO ALL RELEVANT SUBJECTS) |
||
THEME CODE |
THEME NAME |
||
2E150 |
FORMS REMOVED ON CONSTRUCTION SITES OR AUXILIARY MEMBERS THEREOF | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
MA |
MATERIAL |
W: Surface materials X: Bodies of forms Y: Ribs Z: Other characteristic materials |
|
THEME CODE |
THEME NAME |
||
2E220 |
Floor finish |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
GA |
BEHAVIOR AND SHAPE OF MATERIAL |
X: Properties and shapes of materials used as flooring Y: Properties and shapes of materials used as undercoats and support materials Z: Properties and shapes of other members (connection metalpieces, adhesive, etc.) |
|
GB |
MATERIAL |
X: materials used as flooring Y: Materials used as undercoats and support materials Z: Materials used as other members (connection metalpieces, adhesive, etc.) |
|
THEME CODE |
THEME NAME |
||
2H090 |
Liquid Crystal 3 (Substrates, insulating layers, and alignment members) |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
HB |
MATERIALS OF THE INSULATING LAYERS AND ALIGNMENT MEMBERS |
X: Insulation films Y: Orientation members |
|
THEME CODE |
THEME NAME |
||
2H137 |
OPTICAL COUPLINGS OF LIGHT GUIDES | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
CA |
STRUCTURE FOR DEPOSITING, MOUNTING, OR ALIGNING EACH ELEMENT CA11-28 |
A: Optical fibre B: Optical waveguide C: Lens D: Filter E: Other optical elements F: Optical element |
|
THEME CODE |
THEME NAME |
||
2H147 |
OPTICAL INTEGRATED CIRCUITS | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
EA |
MATERIAL OF WAVEGUIDES, SUBSTRATES, OR OTHER CHARACTERISTIC UNITS EA01-48 |
A: A core or the like B: Cladding, buffer layers, or the like C: Substrates D: Other characteristic units |
|
THEME CODE |
THEME NAME |
||
2H149 |
POLARISING ELEMENTS | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
FA |
MATERIAL FA00-59 |
W: Polarisers X: Protective members for polarisers Y: Optical anisotropic elements Z: Others, e.g. substrates of polarising elements |
|
THEME CODE |
THEME NAME |
||
2H186 |
INK JET RECORDING METHODS AND RECORDING MEDIA THEREOF | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
BA |
SHAPE OR STRUCTURE OF RECORDED MATERIALS BA21-34 |
X: Uppermost layer Y: Intermediate layer Z: Undermost layer |
|
BB |
MATERIAL FOR FORMING A LAYER ON A SUPPORT: MACROMOLECULAR COMPOUND BB01-55 |
||
BC |
MATERIAL FOR FORMING A LAYER ON A SUBSTRATE: ADDITIVE BC01-83 |
||
THEME CODE |
THEME NAME |
||
2H189 |
LIQUID CRYSTALS 2 (STRUCTURES IN GENERAL, SPACERS, INLETS OR SEALING MATERIALS) | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
EA |
MATERIAL OF SPACER, INLET, OR SEALING MATERIAL |
X: Spacers Y: Sealing materials Z: Inlet sealants |
|
THEME CODE |
THEME NAME |
||
2H191 |
LIQUID CRYSTAL 4 (COMBINATION WITH OPTICAL MEMBERS) | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
FA |
OPTICAL ELEMENT FA01-99 |
X: Arranged on observer sides Y: Arranged inside cells Z: Arranged on back sides |
|
THEME CODE |
THEME NAME |
||
2H500 |
DEVELOPING AGENTS FOR ELECTROPHOTOGRAPHY | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
EA |
CHARACTERISTICS/ VALUES |
A: Toners B: Binders C: Internal additives D: External additives E: Carriers F: Subject matters not covered by A. to E. in the above |
|
THEME CODE |
THEME NAME |
||
3B005 |
Decoration by transfer pictures |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
FC |
DEVELOPMENT OF MACROMOLECULAR MATERIALS FOR TRANSFER LAYERS |
X: Peeling layers on transfer layers Y: Protection layers for transfer layers Z: Pattern layers of transfer layers |
|
FD |
TRANSFER LAYERS CHARACTERIZED BY SPECIFIC FEATURES |
||
FG |
DEVELOPMENT OF MACROMOLECULAR SUBSTANCES FOR BASE MATERIALS OR ADHESIVE LAYERS |
X: Resin sheets of base materials Y: Separation type layers of basic materials Z: Abrasives layers |
|
THEME CODE |
THEME NAME |
||
3B120 |
Carpets |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
AD |
ADDITIVES OR FILLING AGENTS FOR THE SURFACE, REAR SURFACE, OR INTERMEDIATE LAYERS |
X: Surface layers Y: Intermediate layers (other than surface and rear surface layers) Z: Rear surface layers |
|
THEME CODE |
THEME NAME |
||
3C707 |
MANIPULATOR | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
XK |
CHARACTERISTIC ABOUT THE ASSIST FUNCTION XK36: A, B, C, M XK55: N, P, Q, Z |
A: Rehabilitation with the standing position posture B: Rehabilitation with the seat position posture C: Rehabilitation with the decubitus posture M: Rehabilitation with the other postures N: Angular velocity P: Angular acceleration Q: Power, torque Z: Other state quantity |
|
THEME CODE |
THEME NAME |
||
3D131 |
Tires in general |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
EA |
Tread structures |
U: Tread contact area V: Central part W: Intermediate part X: Shoulder part Y: Buttress part Z: Others |
|
EB |
Tread grooves and sipes |
||
EC |
Tread land parts |
||
ED |
Other characteristics of treads |
||
THEME CODE |
THEME NAME |
||
3D201 |
Seal device for vehicle |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
EA |
MATERIAL (EXCEPT SURFACE TREATMENT MATERIAL) |
A: Whole B: Attachment section C: Holding lips D: Sealing sections E: Terminals sections F: Bonding of terminal sections G: Corner sections H: Core materials Z: Others |
|
THEME CODE |
THEME NAME |
||
3D246 |
BRAKE SYSTEMS; REGULATING BRAKING FORCE | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
HA |
DETECTION OR ESTIMATION OF INFORMATION 1 (VEHICLE INFORMATION) |
A: Detected values which are directly detected B: Estimate values which are calculated based on operations or maps etc. C: Characterised by estimation process per se |
|
HB |
DETECTION OR ESTIMATION OF INFORMATION 2 (INFORMATION OUTSIDE THE VEHICLE) | ||
LA |
PRESSURE CIRCUIT OR ELEMENT THEREOF |
A: Characterised by components per se B: Characterised by arrangements Z: Others |
|
THEME CODE |
THEME NAME |
||
3E067 |
Package bodies |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
BA |
TYPES OF UNIT, INTERIOR AND EXTERIOR CONTAINERS OR WRAPPING MATERIALS |
A: Simple containers B: Inner containers C: Outer containers |
|
BB |
COMPOSITION OF UNIT, INTERIOR AND EXTERIOR CONTAINERS OR WRAPPING MATERIALS |
||
BC |
CONFIGURATIONS OF UNIT, INTERIOR AND EXTERIOR CONTAINERS OR WRAPPING MATERIALS |
||
THEME CODE |
THEME NAME |
||
3E078 |
Machines for manufacturing corrugated board in mechanical paper-making processes |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
CC |
MANUFACTURING PROCESSES FOR CORRUGATED CARDBOARD |
X: Outstanding constituent features |
|
CE |
ATTACHMENT PROCESSES |
||
THEME CODE |
THEME NAME |
||
3E096 |
Packaging of fragile products |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
EA |
KINDS OF PACKAGING EQUIPMENT |
X: Containers Y: Container details, accessories (separate from the main body or of different members) |
|
THEME CODE |
THEME NAME |
||
3G066 |
Fuel injection equipments |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
CA |
STRUCTURE 1 (FUEL FORCE FEED MECHANISM) |
S: Mechanical type T: Liquid type U: Electric type Z: Others |
|
THEME CODE |
THEME NAME |
||
3G091 |
Exhaust gas after treatment |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
GB |
COMPONETN OR MATERIAL, OF CATALYST OR ADSORPTION EQUIPMENT |
W: Catalyst components X: Catalyst carriers Y: Adsorption device components or materials Z: Other components of catalyst or adsorption devices (cases, holding and heat storing materials, and straightening vanes) |
|
THEME CODE |
THEME NAME |
||
3G092 |
Output control and control of special type engine |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
DE |
FUEL SYSTEM, HEATING, COOLING, EVAPORATION AND ATOMIZATION OF AIR FUEL |
S: Main control mechanisms Y: Determination of failures and errors |
|
HA |
AIR INTAKE SYSTEM |
X: Control targets Y: Determination of failures and errors Z: Others |
|
HB |
FUEL SYSTEM |
||
HC |
COMBUSION STATE |
||
HD |
EXHAUST SYSTEM |
||
HE |
ENGINE SYSTEM |
||
HF |
AUXILIARY MACHINERY, OPERATION VEHCLE |
||
HG |
VEHICLE ENVIRONMERNT |
||
THEME CODE |
THEME NAME |
||
3G301 |
Electrical control of the air and fuel supply to internal combustion engines |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
PA |
DETECTION OF INFORMATION ON THE INTAKE SYSTEM |
A: Feedback control targets B: Determination of failures and errors Z: Others |
|
PB |
INFORMATION DETECTED ON THE FUEL SYSTEM |
||
PC |
INFORMATION DETECTED ON THE COMBUSTION CONDITIONS |
||
PD |
INFORMATION DETECTED ON THE EXHAUST SYSTEM |
||
PE |
INFORMATION DETECTED ON THE ENGINE SYSTEM |
||
PF |
INFORMATION DETECTED ON THE OPERATING CONDITION |
||
PG |
OTHER DETECTION INFORMATION |
||
THEME CODE |
THEME NAME |
||
3G384 |
COMBINED CONTROLS OF INTERNAL COMBUSTION ENGINES | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
FA |
INPUT PARAMETER OR SENSOR |
B: Diagnoses, or deterioration determination, e.g. detection parameters themselves Z: Others |
|
THEME CODE |
THEME NAME |
||
3H130 |
STRUCTURES OF NON-POSITIVE DISPLACEMENT PUMPS | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
BA |
PURPOSE OR FUNCTION (ADDITIONAL CODES A-J AND Z) |
A: Casing B: . Guide vane C: Impeller D: Shaft E: Bearing F: Sealing G: Driving source, or power transmission H: Electrical component, excluding motor J: Conduit outside of casing, reservoirs, or value Z: Others |
|
DA |
SHAFT (ADDITIONAL CODES X AND Z) |
X: Specific features of invention Z: Other than specific features |
|
DB |
BEARING (ADDITIONAL CODES X AND Z) | ||
DC |
SEALING (ADDITIONAL CODES X AND Z) | ||
DD |
DRIVING SOURCE (ADDITIONAL CODES X AND Z) | ||
DE |
POWER TRANSMISSION (ADDITIONAL CODES X AND Z) | ||
DF |
ELECTRICAL COMPONENT (ADDITIONAL CODES X AND Z) | ||
DG |
CONDUIT OUTSIDE OF CASING, RESERVOIR, OR VALVE (ADDITIONAL CODES X AND Z) | ||
DH |
LUBRICATION (ADDITIONAL CODES X AND Z) | ||
DJ |
STRUCTURE NOT COVERED BY THE ABOVE F-TERMS (ADDITIONAL CODES X AND Z) | ||
EA |
COUPLING OR ARRANGEMENT (ADDITIONAL CODES A-J AND Z) |
A: Casing B: . Guide vane C: Impeller D: Shaft E: Bearing F: Sealing G: Driving source, or power transmission H: Electrical component, excluding motor J: Conduit outside of casing, reservoir, or value Z: Others |
|
EB |
SHAPE (ADDITIONAL CODES A-J AND Z) | ||
EC |
MATERIAL (ADDITIONAL CODES A-J AND Z) | ||
ED |
METHOD (ADDITIONAL CODES A-J AND Z) | ||
THEME CODE |
THEME NAME |
||
3H178 |
WIND MOTORS | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
DD |
Other constructions |
X: Specific features of the invention Z: Other than specific features |
|
THEME CODE |
THEME NAME |
||
3J552 |
Control of transmission device (gear, wrapping, friction) |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
QA |
FLUID-PRESSURE CIRCUIT |
A: Features in elements other than the architecture and control B: Features in the architecture C: Features in the control |
|
VA |
INFORMATION FROM TRANSMISSION DEVICE |
W: Feature grant X: Error detection Y: Feedback targets Z: Others |
|
VB |
INFORMATION FROM VEHICLES |
W: Feature grant X: Error detection Z: Others |
|
VC |
INFORMATION FROM DRIVE SOURCE |
||
VD |
INFORMATION FOR DRIVER OR OPERATION |
||
VE |
INFORMATION FROM OUTSIDE |
||
THEME CODE |
THEME NAME |
||
3K107 |
ELECTROLUMINESCENT LIGHT SOURCES | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
DD |
CHARACTERISTIC FEATURE OF ELEMENT STRUCTURE, MATERIAL, OR SHAPE DD41-47 |
X: Anodes Y: Cathodes Z: Other electrodes, terminals, or wiring |
|
THEME CODE |
THEME NAME |
||
4B034 |
Paste products from fish meats |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
LK |
RAW MATERIALS, ADDITIVES |
X: Those uniformly present in the products Y: Those other than X and Z Z: Those present as layers |
|
THEME CODE |
THEME NAME |
||
4B044 |
Manufacturing of cigarettes and cigars |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
CA |
MANUFACTURING OF CIGARS |
X: Not steps improved in VIEWPOINT of CL and CM (no featured parts) Y: Steps improved in VIEWPOINT of CL and CM (featured parts) |
|
CB |
ROLLING OF CIGARETTES |
||
CC |
ATTACHMENT PROCESSES IN CIGARETTE MANUFACTURING |
||
CD |
HOLE-PUNCHING PROCESSES IN CIGARETTE MANUFACTURING |
||
CE |
TRANSPORT PROCESSES IN CIGARETTE MANUFACTURING |
||
CF |
INSPECTION AND DETECTION PROCESSES IN CIGARETTE MANUFACTURING |
||
CG |
MANUFACTURING OF SPECIAL AND OTHER SHAPES |
||
THEME CODE |
THEME NAME |
||
4B050 |
Enzymes and modification thereof |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
FF |
EXTRACTION AND REFINEMENT OF ENZYMES |
C: Described in the scope of claim for patent E: Described in embodiments only |
|
THEME CODE |
THEME NAME |
||
4B065 |
Microorganisms and culturing process thereof |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
AA |
TYPES OF MICROORGANISMS |
X: micro-organism per se Y: Gene taking sources |
|
THEME CODE |
THEME NAME |
||
4C076 |
Medicinal preparations |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
DD |
INERT INGREDIENTS I |
A: Basic agents B: Disintegrating agents (elution accelerators) C: Lubricants D: Isotonizing agents E: Solubilizing agent F: Emulsifying, suspending and dispersing agents G: Viscosity adjusting agents H: Coating agents J: Enteric coating agents K: Multilayer coating agents L: Coat forming auxiliary agent M: sustained release and sustaining agents N: Absorption promoter (penetrants) P: Gelling and coagulating agents Q: Stabilizer R: Antiseptic agents S: Antioxidants T: Flavoring and odorant substances U: Coloring agents V: Foaming agents W: Analgesic agents X: Wetting agents Y: Finishing agents Z: pH regulating and buffer agents |
|
EE |
INERT INGREDIENTS II |
||
THEME CODE |
THEME NAME |
||
4C081 |
Materials for medical uses |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
CA |
CHARACTERISTIC SYNTHETIC MACROMOLECULAR MATERIALS |
1: Basic materials 2: Addition, coating or dispersing agents |
|
CB |
TYPES OF RESINS |
||
CD |
CHARACTERISTICS OF NATURAL MACROMOLECULAR COMPOUNDS AND HOMOGENEOUS MATERIALS |
||
CF |
INORGANIC SUBSTANCES |
||
THEME CODE |
THEME NAME |
||
4C083 |
Cosmetics |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
AA |
NATURAL INGREDIENTS, AND INGREDIENTS WHOSE STRUCTURE OR COMPOSITION IS UNCLEAR |
1: Scope of claim for patent 2: Embodiments |
|
AB |
INORGANIC INGREDIENTS |
||
AC |
ORGANIC INGREDIENTS CHARACTERIZED BY ELEMENT |
||
AD |
ORGANIC INGREDIENTS CHARACTERIZED BY STRUCTURE |
||
THEME CODE |
THEME NAME |
||
4C084 |
Medicines that contain protein lipid enzymes and other medicines |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
ZA |
MEDICAL USES AND TARGET ORGANS |
1: Whole product 2: Components |
|
ZB |
MEDICAL USES AND ORGANISM PROTECTION |
||
ZC |
MEDICAL USES, FUNCTIONS, TARGETS, AND OTHERS |
||
THEME CODE |
THEME NAME |
||
4D006 |
Separation using semi-permeable membranes |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
JA |
CHARACTERISTIC SEPARATION-DEVICE ELEMENTS |
A: Shape and construction B: Dimension (numerical limit) C: Materials Z: Others |
|
KE |
CONTROL |
P: Factors to be detected Q: Factors to be controlled R: Factors to be limited numerically |
|
MC |
MEMBRANE MATERIALS |
X: Describing manufacturing methods |
|
THEME CODE |
THEME NAME |
||
4D048 |
Waste gas treatment by catalysts |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
BA |
CATALYS OR CARRIER COMPONENTS |
X: Including embodiments (including experiments, comparisons, etc.) Y: No embodiments |
|
THEME CODE |
THEME NAME |
||
4D075 |
Application of or painting with fluid materials |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
BB |
TREATMENT METHOD |
X: Pre-processing (treatment before application) Y: Intermediate processing (treatment during application) Z: Post-processing (treatment after application) |
|
THEME CODE |
THEME NAME |
||
4D076 |
Vaporization, distillation, condensation, sublimation, and cold traps |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
EA |
DETECTION, ONTROL, OR NUMERIC LIMITS |
X: Detection and measurement Y: Control Z: Numeric limit |
|
THEME CODE |
THEME NAME |
||
4D077 |
Emulsifier, dispersant, foaming agent, wetting agent |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
DA |
AGENT STRUCTURE 1 UNKOWN STRUCTURES |
X: Mono-compound (the said compound is solely used) Y: Composite (the said compound is used as dispersing agent composite) Z: Raw material (the said compound is used as a raw material), modification, processing and addition agents |
|
DB |
AGENT STRUCTURE 2 INORGANIC SUBSTANCES |
||
DC |
AGENT STRUCTURE 3 DIMER OR SMALLER AGGREGATE OF LOW MOLECULAR ORGANIC COMPOUNDS |
||
DD |
AGENT STRUCTURE 4 POLYMER (TRIMER AND LARGER AGGREGATE) |
||
DE |
AGENT STRUCTURE 5 (STRUCTURE OF THE POLYMER OTHER THAN THAT OF THE PRINCIPAL CHAIN) |
||
THEME CODE |
THEME NAME |
||
4D116 |
FILTRATION OF LIQUID | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
FF |
COMPONENTS OF FILTERING ELEMENTS (FILTERING MATERIALS), PRECURSORS BEFORE MOLDING |
A: Loose filtering materials B: Functional units of the solid filtering elements for filtering |
|
HH |
CHARACTERISTICS OF FILTERING ELEMENTS (FILTERING MATERIALS) AND THE LIKE, ADDITIONAL CHARACTERISTICS |
A: Loose filtering materials B: Functional units of the solid filtering elements for filtering C: Functional units for other purposes than filtering |
|
QA |
AUXILIARY DEVICES AND AUXILIARY PROCESSING OF FILTERS |
A: Operations before filtration B: Operations after filtration C: Operations during filtration D: Filtering on the upperstream sides of the filters E: Treatments other than filtering on the downstream sides of the filter F: Filtering in the filters G: Filtering in the alternative parts of the filters |
|
QC |
DETECTION AND CONTROL OF FILTERS |
A: Liquid feed B: Filtered liquid C: Filter cakes D: Cleaning medium |
|
THEME CODE |
THEME NAME |
||
4D624 |
WATER TREATMENT BY SORPTION | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
CB |
WATER PURIFIER FOR DRINK CB71-83 |
A: Detection objects B: Results of operations C: Objects to be controlled D: Values used for life detection |
|
THEME CODE |
THEME NAME |
||
4F033 |
Nozzles |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
QB |
SPRAYING MATERIAL AND CARRYING FLUID |
X: Spraying substances Y: Carrying fluids |
|
QF |
SUPPLYING DEVICE/METHOD FOR SRRAYING MATERIAL OR CARRYING FLUID |
||
QK |
SENSING OR CONTROLLING |
||
THEME CODE |
THEME NAME |
||
4F071 |
Manufacture of shaped articles or materials containing macromolecular substances |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
AA |
ORGANIC MACROMOLECULAR COMPOUNDS |
A: Processing and adhesive agents B: Objects to be adhered C: Ion exchange membrane reinforcement, supporting and coating materials X: Copolymerization ingredients |
|
AB |
INORGANIC COMPOUND COMPONENTS |
A: Processing and adhesive agents B: Objects to be adhered C: Ion exchange membrane reinforcement, supporting and coating materials |
|
AC |
ORGANIC COMPOUND COMPONENTS |
||
AD |
COMPONENTS DEFINED BY SHAPE |
||
AE |
COMPONENTS DEFINED BY FUNCTION |
||
AF |
PROPERTIES |
A: Processing and adhesive agents B: Objects to be adhered C: Ion exchange membrane reinforcement, supporting and coating materials Y: Properties numerically limited |
|
THEME CODE |
THEME NAME |
||
4F074 |
Manufacture of porous articles, and recovery and treatment of waste products |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
AA |
MACROMOLECULAR MATERIALS |
A: Random B: Block C: Random block D: Graft E: Features in side chains F: Featuring the presence of COOH groups as side chains G: Featuring the presence of OH groups as side chains H: Featuring the presence of hydrolysis silicon as side chains J: Featuring the presence of ion exchange groups as side chains K: Styrene impregnation polymerization L: Scrap M: Liquid type N: Those crosslinked in advance |
|
CC |
PRDUCTION METHOD (3) |
X: Processing before porous process Y: Processing in porous process Z: Processing after porous process W: Processing at unspecified timing |
|
THEME CODE |
THEME NAME |
||
4F100 |
Laminated bodies (2) |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
AA-AT |
MATERIAL |
1: Previous process 2: Laminating process 3: Post-process A: First layer B: Second layer C: Third layer D: Fourth layer E: More than fifth layer G: Adhesive materials H: Addition and filling agent materials J: Copolymers K: Further specifying by the lower term |
|
CA-CC |
ADDITIVES AND FILTERS, ADHESIVE MATERIALS, COATING MATERIALS |
||
DA-DJ |
SHAPE, STRUCTURE |
||
EA-EG |
PROCESSES |
||
JA-JM |
PROPERTIES, FUNCTIONS AND STATES |
||
YY |
VARIABTS WITH DEFINED NUMERICAL VALUES |
||
THEME CODE |
THEME NAME |
||
4F201 |
Processing and handling of plastics and other materials for molding in general |
||
4F202 |
Molds for molding plastics and the like |
||
4F203 |
Heating, cooling and curing of plastics and the like in general |
||
4F204 |
Molding by casting and compression molding of plastics and the like |
||
4F205 |
Forming by coating of molds, and forming of reinforced plastics |
||
4F206 |
Injection molding of plastics and the like |
||
4F207 |
Extrusion molding of plastics and the like |
||
4F208 |
Blow-molding and thermoforming of plastics and the like |
||
4F209 |
Shaping by bending or straightening, shaping of tube ends, and surface shaping |
||
4F210 |
Shaping by stretching and by release of stress in plastics and the like |
||
4F211 |
Lining and joining of plastics and the like |
||
4F212 |
Shaping of plastics and the like by special foaming, and production of tires from plastics |
||
4F213 |
Other types of shaping and compound shaping of plastics and the like |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
AA |
RESIN MATERIAKS, ETC(MAIN MOULDING MATERIAL) |
A: Further specifying by the chemical constitution B: Further specifying by the shape and construction C: Further specifying by the property D: Further specifying by other index E: Copolymers F: Block G: Graft H: Random J: Modification K: Main components of polymer blend L: Monomers and pre-polymers |
|
AB |
ADDITIVE/COMOUNDING AGENT |
A: Further specifying by the chemical constitution B: Further specifying by the shape and construction C: Further specifying by the property D: Further specifying by other index |
|
AC |
STATE AND TYPE OF MATERIALS |
||
AD |
INCERTS (INCERT, REINFORCEMENT, CORE MATERIALS, SURFACE MATERIAL, LINING OBJECTIVE/MATERIALS,BONFDING OBJECT) |
||
THEME CODE |
THEME NAME |
||
4F401 |
SEPARATION, RECOVERY OR TREATMENT OF WASTE MATERIALS CONTAINING PLASTICS | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
FA |
SENSING, CONTROLLING, OR NUMERICAL LIMITATION |
X: Sensing Y: Controlling Z: Numerical Limitation |
|
THEME CODE |
THEME NAME |
||
4G005 |
Manufacturing of micro-capsules |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
DA |
COMPONENTS (1) (I.E., INORGANIC SUBSTANCES) |
W: Addition agents and others X: Core materials Y: Wall film substances (raw materials) Z: Wall film substances (generated products) |
|
DB |
COMPONENTS (2) (ORGANIC COMPOUNDS AND COMPOSITES IN GENERAL, AND PRIMARILY NATURAL GROUPS) |
||
DC |
COMPONENTS (3) (I.E., NON-MACROMOLECULAR ORGANIC COMPOUNDS) |
||
DD |
COMPONENTS (4) (I.E., MACROMOLECULAR COMPOUNDS AND MAINLY SYNTHETIC COMPOUNDS) |
||
DE |
COMPONENTS (5) (I.E., CHARACTERISTICS AND FUNCTIONS) |
||
THEME CODE |
THEME NAME |
||
4G065 |
Colloid chemistry |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
AB |
ORGANIC COMPOUNDS AS STRUCTURAL COMPONENTS |
X: Compound having a single functional group Y: Compound having multiple functional groups |
|
THEME CODE |
THEME NAME |
||
4G066 |
Solid-sorbent or filter-aiding compositions |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
AA |
GROUP I INORGANIC COMPOUNDS |
A: Raw materials B: Active ingredients of adsorption agents, etc. C: Carriers and supports of adsorption agents, etc. D: Processing agents etc. |
|
AB |
GROUP II ELEMENT ORGANIC COMPOUNDS |
||
AC |
GROUP III ORGANIC MACROMOLECULAR COMPOUNDS |
||
AD |
GROUP IV COMPOUNDS (I.E., CONSIDERED FROM THE VIEWPOINT OF THE SPECIFIC BASE CONSTITUENTS) |
||
AE |
GROUP V COMPOUNDS - CAHARCTERISTICS AND FUNCTIONS OF STRUCTURAL CONSTITUENTS |
||
THEME CODE |
THEME NAME |
||
4G146 |
Carbon and carbon compounds |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
AC |
CARBON AND CARBON COMPOUNDS 3 (NUMERICAL VALUE LIMITATION) |
X: Described in the claim Y: Embodiments or drawings |
|
BC |
MANUFACTURING 3 (MANUFACTURING PROCESSES AND CONDITIONS) |
||
MB |
CARBIDES AND COMPOUNDS CONTAINING CARBON AND SULFUR 2 (OTHERS) |
||
THEME CODE |
THEME NAME |
||
4G169 |
CATALYSTS | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
BA |
COMPONENT I SPECIFIC SUBSTANCE BA01-06, 08-16, 20-29: A-C BA07: A, B BA31-36, 41-48: A, C |
A: Catalyst ingredients (Claims) B: Catalyst ingredients (Working examples) C: Raw materials, additives, treating agents, bonding agents, regenerating agents (Claims) |
|
BB |
COMPONENT II INORGANIC SUBSTANCE BB01-20: A-C |
||
BC |
COMPONENT III METALLIC ELEMENT BC01-75: A-C |
||
BD |
COMPONENT IV NON-METALLIC ELEMENT BD01-17: A-C |
||
BE |
COMPONENT V ORGANIC SUBSTANCE AND LIGAND BE01-48: A-C |
||
EA |
STRUCTURE AND PHYSICAL PROPERTY I-I PROFILE PER SE EA01-04: X, Y |
X: Descriptions in claims Y: Descriptions in detailed description and working examples |
|
EB |
STRUCTURE AND PHYSICAL PROPERTY I-II OTHER CHARACTERISTIC RELATING TO PROFILE EB12-18: X, Y |
||
EC |
STRUCTURE AND PHYSICAL PROPERTY II MICROSTRUCTURE EC01-18, 21-22: X, Y |
||
ZA |
ZEOLITE AND MOLECULAR SIEVE (MS) ZA01-46: A, B |
A: Catalyst ingredients (Claims) B: Catalyst ingredients (Working examples) |
|
ZF |
MODE OF CATALYST COMPOSITION ZF01-10: A, B |
||
THEME CODE |
THEME NAME |
||
4H056 |
Dyes |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
AD |
TYPES OF SUBSTITUTED GROUPS |
![]() B: Constituents of positions 1, 4, 5 and 8 C: Constituents of positions 2, 3, 6 and 7 |
|
BF |
TYPES OF AR SUBSTITUTED GROUPS |
![]() E: Constituents of positions 2 and 7 F: Constituents of positions 3 and 6 |
|
THEME CODE |
THEME NAME |
||
4H104 |
Lubricants |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
AA |
INORGANIC COMPOUNDS |
A: Base materials B: Thickening agents C: Addition agents R: Raw materials of reaction products Z: Others |
|
BA-BJ |
NON-MACROMOLECULAR ORGANIC COMPOUNDS |
||
CA-CJ |
MACROMOLECULAR ORGANIC COMPOUNDS |
||
DA-DB |
COMPONENTS OR REACTION PRODUCTS OF UNKNOWN OR UNCERTAIN STRUCTURE |
||
EA |
SPECIFICATION BY PHYSICAL OR CHEMICAL PROPERTIES, AND COMPONENT CHARACTERISTICS |
||
THEME CODE |
THEME NAME |
||
4H129 |
REFINING PETROLEUM; PRODUCTION OF LIQUID HYDROCARBON MIXTURES | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
KC |
CARRIER OR BASE-MATERIAL KC01-40 |
X: Scope of claims Y: Working example |
|
KD |
CARRIED METAL OR COMPONENT KD01-50 |
||
MB |
TREATMENT IN STEP MB01-20 |
A: First step B: Second step C: Third step D: Fourt step E: Fifth step or later |
|
THEME CODE |
THEME NAME |
||
4J001 |
Polyamides |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
EE |
OTHER (EXCEPT EA00- ED00) COMPONENTS |
A: Constituents forming the main chain of polymers B: Activating agents that are constituents comprising crosslinking agents, chain extenders and polymers C: Constituents bonding with ends and side chains, chain extension stop agents D: Catalysts, catalyst aids, activating agents and polymerization accelerators (not comprising polymers) E: Constituents not reacting with polymers F: Others (solvents, solvent aids and dispersing agents) |
|
THEME CODE |
THEME NAME |
||
4J002 |
Macromolecular compounds |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
AA-CQ |
KIND OF POLYMER |
1: First polymer constituent that are the greatest component of the polymer W: First polymer constituent that can be the greatest component of the polymer or other than that 2: Second polymer constituent that are other than the greatest component of the polymer X: Second polymer constituent that can be the greatest component of the polymer or other than that 3: Third polymer constituent that are other than the greatest component of the polymer Y: Third polymer constituent that can be the greatest component of the polymer or other than that 4: Fourth polymer constituent that are other than the greatest component of the polymer Z: Fourth polymer constituent that can be the greatest component of the polymer or other than that 5: Fifth and subsequent polymer constituents that are other than the greatest component of the polymer U: Fifth and subsequent polymer constituents that can be the greatest component of the polymer or other than that 6: First addition agent constituent 7: Second addition agent constituent 8: Third addition agent constituent 9: Fourth and subsequent agent constituents 0: Functions of addition agent constituents described in detailed Description of invention only |
|
DA-EZ |
KIND OF COMPOUNDS |
||
GA-HA |
FORMATION OF COMPOSITIONS AND TREATMENT |
||
THEME CODE |
THEME NAME |
||
4J029 |
Polyesters and polycarbonates |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
BB |
SIMPLE-RING ARYL DIOLS WHERE THE NUMBER OF SIMPLE ARYL GROUPS IN THE MAIN CHAIN IS n |
A: Comprising principal chains only, i.e. without side chains B: Principal chain Ar (aromatic hydrocarbon) having side chains C: Principal chain R (aliphatic hydrocarbon) and H (alicyclic hydrocarbon) having side chains (those other than A and B) |
|
BC |
CONDENSED-RING ARYL DIOLS WHERE THE NUMBER OF CONDENSED ARYL GROUPS IN THE MAIN CHAIN IS n |
||
BD |
HYDROGEN-CONTAINING DIOLS WHERE THE NUMBER OF (H) IN THE MAIN CHAIN IS n |
||
CB |
SIMPLE-RING ARYL DICARBOXYLIC ACIDS WHERE THE NUMBER OF SIMPLE ARYL GROUPS IN THE PRINCIPAL RING IS n |
||
EB |
OXYGEN-CONTAINING HYDROXY CARBOXYLIC ACIDS |
||
ED |
OXYGEN-CONTAINING HYDROXY CARBOXYLIC ACIDS |
||
BE |
DIOLS THAT CONTAIN OXYGEN OTHER THAN IN ETHERS |
A: Comprising principal chains only, i.e. without side chains B: Principal chain Ar (aromatic hydrocarbon) having side chains |
|
BF |
DIOLS THAT CONTAIN OXYGEN IN ETHERS |
||
CC |
CONDENSED-RING ARYL DICARBOXYLIC ACIDS WHERE THE NUMBER OF SIMPLE ARYL GROUPS IN THE PRINCIPAL RING IS n |
||
EC |
HYDROXY CARBOXYLIC ACIDS THAT CONTAIN CONDENSED RING ARYL GROUPS OR (H) |
||
BG |
HALOGEN-CONTAINING DIOLS |
X: Halogen bonded to Ar (aromatic hydrocarbon) Y: Halogen bonded to others (R (aliphatic carbon) and H (alicyclic hydrocarbon)) |
|
CG |
HALOGEN-CONTAINING DICARBOXYLIC ACIDS |
||
HA |
HYDROXYL GROUP RAW MATERIALS |
A: Without substituents B: Ar (aromatic hydrocarbon) having substituents C: R (aromatic hydrocarbon) having substituents |
|
HB |
CARBOXYL GROUP RAW MATERIALS |
||
HC |
CARBONATE SYSTEM RAW MATERIALS |
||
JA |
LOW-MOLECULAR-WEIGHT INORGANIC COMPOUNDS |
1: Catalysts (polymerization initiators) 2: Polymer constituents 3: Addition agents and others (not known whether they are polymer constituents or not) |
|
JB |
LOW-MOLECULAR-WEIGHT ORGANIC COMPOUNDS (E.G., HYDROGEN, CARBON, HALOGENS, OR OXYGEN) |
||
JC |
LOW-MOLECULAR-WEIGHT ORGANIC COMPOUNDS (I.E., OTHER ATOMS) |
||
JE |
MACROMOLECULAR COMPOUNDS |
||
JF |
COMPOUNDS CATEGORIZED BY METALS |
||
THEME CODE |
THEME NAME |
||
4J038 |
Paints and paint removers |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
AA-FA |
FILM-FORMING COMPONENTS |
1: First constituents (group) (the greatest component); the greatest component, when the film comprises only one constituent; not known which is the greatest or equal amounts 2: Second constituents (group); when polymers are "addition agents" |
|
HA |
INORGANIC ADDITIVES (OR FILM-FORMING COMPONENTS) |
1: Inorganic film constituent (the greatest component) 2: Inorganic film constituent (other than the greatest component) 6: Inorganic addition agents |
|
THEME CODE |
THEME NAME |
||
4J040 |
Adhesives and adhesion methods |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
AA-FA |
ADHESIVES COMPONENTS |
1: First constituent (group) (the greatest component); when the adhesive bonding comprises only one constituent; when not known which is the greatest 2: Second and subsequent constituents (groups); when polymers are "addition agents" |
|
HA |
INORGANIC ADDITIVES |
1: First constituent (group) (the greatest component); when adhesive bonding comprises only one constituent; when not known which is the greatest; inorganic adhesive bonding constituent (the greatest component) 2: Second and subsequent constituents (groups); when polymers are "addition agents"; inorganic adhesive bonding constituents (other than the greatest component) 6: Inorganic additives |
|
THEME CODE |
THEME NAME |
||
4J043 |
General polymers formed from nitrogen-containing bonded groups |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
PC |
MANUFACTURE OF POLYMER CHAINS |
5: Information on precursors 6: Information on final polymers |
|
UA |
INFORMATION ABOUT RINGS IN MONOMER BASE CHAINS |
1: Information on basic monomers 2: Information on acidic monomers |
|
UB |
CONNECTED GROUPS AND BRIDGED GROUPS IN MONOMER BASE CHAINS |
||
VA |
POSITION OF COMBINED BRIDGED GROUPS ON MONOMER RING STRUCTURES |
||
THEME CODE |
THEME NAME |
||
4J100 |
Addition polymers and copolymers, and post- treatments and modifications therefor |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
AA-AU |
KIND OF MONOMER |
P: First monomer constituent that is the greatest monomer component, or first monomer constituent that can be the greatest component of the monomer or other than that Q: Second monomer constituent that is other than the greatest monomer component, or second monomer constituent that can be the greatest component of the monomer or other than that R: Third monomer constituent that is other than the greatest monomer component, or second monomer constituent that can be the greatest component of the monomer or other than that S: Fourth monomer constituent that is other than the greatest monomer component, or second monomer constituent that can be the greatest component of the monomer or other than that T: Fifth monomer constituent that is other than the greatest monomer component, or second monomer constituent that can be the greatest component of the monomer or other than that |
|
BA-BD |
SUBSTITUENTS |
H: Used in substituent terms given to functional groups introduced by chemical modification P: First monomer constituent that is the greatest monomer component, or first monomer constituent that can be the greatest component of the monomer or other than that Q: Second monomer constituent that is other than the greatest monomer component, or second monomer constituent that can be the greatest component of the monomer or other than that R: Third monomer constituent that is other than the greatest monomer component, or second monomer constituent that can be the greatest component of the monomer or other than that S: Fourth monomer constituent that is other than the greatest monomer component, or second monomer constituent that can be the greatest component of the monomer or other than that T: Fifth monomer constituent that is other than the greatest monomer component, or second monomer constituent that can be the greatest component of the monomer or other than that |
|
THEME CODE |
THEME NAME |
||
4J127 |
MACROMONOMER-BASED ADDITION POLYMER | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
BA |
COMPONENT OF MACROMONOMER BA00, 03-16 |
1: First macromonomer component 2: Second macromonomer component 3: Third macromonomer component 4: Fourth or later macromonomer component |
|
BB |
UNSATURATED GROUP OF MACROMONOMER | ||
BC |
STRUCTURE OF MACROMONOMER | ||
BD |
TYPE OF MACROMONOMER, I.E. CHEMICAL STRUCTURE | ||
BE |
RAW MATERIAL, I.E. UNSATURATED COMPOUND, FOR MACROMONOMER | ||
BF |
RAW MATERIAL, I.E. SATURATED COMPOUND, FOR MACROMONOMER | ||
BG |
FUNCTIONAL GROUP CONTAINED IN MACROMONOMER | ||
CA |
MONOMER COMPONENT CA00, 04, 05 |
1: First monomer component 2: Second monomer component 3: Third monomer component 4: Fourth or later monomer component |
|
CB |
TYPE OF MONOMERS, I.E. CHEMICAL STRUCTURE | ||
CC |
FUNCTIONAL GROUP CONTAINED IN MONOMER | ||
BE |
RAW MATERIAL, I.E. UNSATURATED COMPOUND, FOR MACROMONOMER |
X: Before introduction of unsaturated group Y: At the time of introduction of unsaturated group Z: After introduction of unsaturated group 1: First macromonomer component 2: Second macromonomer component 3: Third macromonomer component 4: Fourth or later macromonomer component |
|
BF |
RAW MATERIAL, I.E. SATURATED COMPOUND, FOR MACROMONOMER | ||
BG |
FUNCTIONAL GROUP CONTAINED IN MACROMONOMER | ||
THEME CODE |
THEME NAME |
||
4J128 |
Transition and organic metals composition catalysts for addition polymerization |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
BA |
NUMBER OF TIMES THAT ORGANO-METALLIC COMPOUNDS ARE USED (WHEN NOT USED, ASSIGNED HERE) |
A: Number of use in transition metal constituents B: Number of use in organic constituents |
|
BB |
NUMBER OF TIMES THAT ORGANO-ALUMINUM COMPOUNDS ARE USED (WHEN NOT USED, ASSIGNED HERE) |
||
BC |
ACTUAL ORGANO-METALLIC COMPOUNDS (OTHER COMPOUNDS ASSIGNED HERE) |
A: Those used in transition metal constituents B: Those used in organic metal constituents |
|
CA |
OTHER COMPOUNDS (I.E., INORGANIC COMPOUNDS) |
A: Those used in transition metal constituents B: Those used in organic metal constituents C: Those used as the tertiary constituent |
|
CB |
OTHER COMPOUNDS (I.E., ORGANIC COMPOUNDS) |
||
DB |
CATALYST TREATMENT AND TREATED COMPONENTS |
A: Treatment for transition metal constituents B: Treatment for organic metal constituents C: Treatment for the tertiary constituents |
|
THEME CODE |
THEME NAME |
||
4J246 |
Silicon polymers |
||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
BA |
CLASSIFICATION BY ARRANGEMENT OF OXYGEN ATOMS AROUND SILICON |
0: General X: Described in the embodiment |
|
BB |
BONDING BETWEEN ADJACENT SILICON ATOMS; BONDING CONTAINING ITERATION UNITS (see EA) |
0: General X: Described in the embodiment 1: Concatenations that already exist in materials before polymerization 2: Concatenations formed by polymerization 3: Concatenations formed by post-modification |
|
CA |
MONOHYDRIC GROUPS CONTAINING SILICON; GROUPS CONTAINING ITERATION UNITS (see EA) |
0: General 8: When AA18 is given 9: When AA19 is given X: Described in the embodiment E: Groups existing on the end silicon atoms M: Groups introduced by modification U: Groups before modification |
|
FA |
FORMATION METHODS OF POLYMERS |
1: Methods for forming concatenations of category BB 2: Methods for forming parts other than the above |
|
FB |
CONTROL AGENTS NOT CONTAINING METALS, BORON AND SILICON THAT ARE PRESENT WITHIN THE REACTION SYSTEM |
1: Catalysts for forming concatenations of category BB 2: Catalysts for forming parts other than the above 3: Conditioners having functions other than the catalytic effects |
|
FC |
CONTROL AGENTS CONTAINING METALS, BORON AND SILICON THAT ARE PRESENT WITHIN THE REACTION SYSTEM |
||
THEME CODE |
THEME NAME |
||
5C164 |
TWO-WAY TELEVISIONS, DISTRIBUTION OF MOVING PICTURE OR THE LIKE | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
MA |
KIND OF CONTENT DATA |
P: F-term which covers the technical feature of the invention most explicitly S: F-term which covers the other technical feature |
|
MB |
PROCESSING ADDITIONAL INFORMATION OR CONTENT | ||
MC |
PROCESSING FOR PRODUCING CONTENT | ||
SA |
HARDWARE ON SERVER SIDE | ||
SB |
SIGNAL PROCESSING IN SERVER | ||
SC |
MANAGING PROGRAMME OR SYSTEM ON SERVER SIDE | ||
SD |
APPLICATION | ||
TA |
TRANSMISSION MEDIA OR NETWORK FORM | ||
TB |
CONTROL SIGNAL TO BE TRANSMITTED OR SIGNAL PROCESSING | ||
TC |
CONTROL IN PROGRAMME OR SYSTEM MANAGEMENT LAYER | ||
UA |
HARDWARE ON CLIENT SIDE | ||
UB |
SIGNAL PROCESSING ON CLIENT SIDE | ||
UC |
MANAGING PROGRAMME OR SYSTEM ON CLIENT SIDE | ||
UD |
APPLICATION | ||
VA |
DEVICE OR PROCESSING SPECIALLY ADAPTED FOR VIDEO TELEPHONE OR CONFERENCE | ||
THEME CODE |
THEME NAME |
||
5C380 |
CONTROL OF EL DISPLAYS | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
CD |
INFORMATION ON DIAGRAM OF PICTURE ELEMENT CIRCUIT CD01-07 |
0: No transistor (including switch) for one picture element 1: One transistor (including switch) for one picture element 2: Two transistors (including switch) for one picture element 3: Three transistors (including switch) for one picture element 1: Four transistors (including switch) for one picture element 5: Five transistor (including switch) for one picture element 6: Six transistors (including switch) for one picture element 7: Seven transistors (including switch) for one picture element 8: Eight transistors (including switch) for one picture element 9: Nine or more transistors (including switch) for one picture element |
|
THEME CODE |
THEME NAME |
||
5G031 |
SWITCHES WITH COMPOUND OPERATIONS | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
AS |
PURPOSE, PROBLEM, FUNCTION, WORKING OR EFFECT |
F: Spring H: Operating member J: Drive member K: Contact member L: Locking M: Click-stop or click N: Case, housing, box body P: Terminal, power supply and distribution Q: Display, illumination Z: Others |
|
BS |
PHYSICAL PROPERTY OR NUMERICAL LIMITATION | ||
CS |
MATERIAL, RAW MATERIAL | ||
DS |
PROPERTY | ||
ES |
MANUFACTURING OR ASSEMBLING | ||
FS |
MECHANISM ELEMENT | ||
THEME CODE |
THEME NAME |
||
5G206 |
PUSH-BUTTON SWITCHES | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
AS |
PURPOSE, PROBLEM, FUNCTION, WORKING OR EFFECT |
F: Springs or elastic bodies H: Operating member J: Driving member K: Contact member L: Lock M: Moderation or clicking N: Case, housings, boxes or panels P: Terminal, or feeding or distribution of electric power Q: Display Z: Others |
|
BS |
PROPERTY OR NUMERICAL REGULATION | ||
CS |
MATERIAL OR RAW MATERIAL | ||
DS |
NATURE | ||
ES |
MANUFACTURE OR ASSEMBLING | ||
FS |
MECHANISM ELEMENT | ||
THEME CODE |
THEME NAME |
||
5H043 |
CONNECTION OF BATTERIES OR TERMINALS | ||
|
|||
VIEWPOINT |
DESCRIPTION |
ADDITIONAL CODE |
|
HA |
MANUFACTURING OR TREATMENT |
D: DA for external output-terminals E: EA for internal conductive connection F: FA for connection between cells |
|
JA |
SHAPE OR STRUCTURE | ||
KA |
MATERIAL | ||
LA |
NUMERICAL LIMITATION; SPECIFIED SIZE OR RANGE | ||